RO 82 Track Series

To add to cart, choose from the options below.

Anodized aluminum

The RO 82 Track Series for mounting to the ceiling and wall for doors weighing up to 100 kg (220 lb) each.

- Designed for clip-on fascia
- Choose from 3 track lengths:
o 2000 mm (78 3/4 in)
o 3000 mm (118 in)
o 4000 mm (157 in)
- Three bracket sizes to wall mount tracks, for maximum door thickness 45 mm (1 3/4 in) sold separately
- Spacer profile for single tracks to assemble as double and triple tracks
- Simple and Flexible installations

IMPORTANT: Use metric dimensions for greater accuracy during installation.
Overall Length: 78 3/4 in* 9 ft 10 in* 13 ft 1 in* Select Options
Product # Overall Length
891959A210 78 3/4 in*
891959A310 9 ft 10 in*
891959A410 13 ft 1 in*


- For sliding system RO 82
- Clip-on fascia sold separately
- Brackets to wall mount tracks sold separately
- Spacer profile to assemble single track as double or triple tracks


Detailed Door Movement
Single sliding, Bypassing, Biparting
Track type
Box Track
Compatible with
RO 82
Door Installation
Top Hung
Load Capacity
33.1 to 220 lb*
Manufacturing Material
Track Mounting
Ceiling Mount
Roller Position
Anodized Aluminum
Door Movement
Straight Sliding, Movable Wall
Door Thickness
23/32 to 1 25/32 in*
Product type
Running and Guiding Tracks
Closet and Walk-In Closet, Standard Access Door

Measures shown with an asterisk (*) have been converted as per your preference. These are not the official measures. To view the measures specified by the manufacturer, click here.


1 track


- Use metric dimensions for greater accuracy during installation.
- Please make sure to read the entirety of the installation manual before proceeding with the installation.
- Wear safety gear such as gloves, safety glasses, safety shoes, and ear protection.
- Every fastener used to attach the track to the wall must be fastened securely into a structural surface.
- Always remove debris/dust/residues (sawdust and/or aluminum) from all tracks and guide channels using a dry cloth during installation and before operating the system.
- Never spray lubricant on this product.
- Do not exceed stated limitations and parameters. This will cause early wear and performance failure, and will void the warranty.



- Pictures provided for visual reference only: actual product may vary.
- All required hardware should be ordered and obtained prior to initiating fabrication or installation work. Please verify that the parts and quantities listed in your order are correct before proceeding to checkout.
- Always use instructions provided by the manufacturer, as included with the product. Manufacturer reserves the right to amend, modify, or otherwise supplement any previously issued product and/or technical information, as deemed required from time to time, without prior notice.
- The documentation, drawings, and instructions on this page apply to the system described on this page only. Richelieu expressly declines all responsibility for any design or construction that combines this system with systems from this same manufacturer or systems from other manufacturers.
- Installation of the product shall be executed by qualified individuals only, always ensuring that each product is securely installed using proper fixation methods, as appropriate for each applicable substratum. We trust that anyone installing these products has the required skills, knowledge, and experience. Richelieu expressly disclaims any liabilities for results obtained through improper use or installation.