TYPE 1920 Aluminum Track

To buy, choose from the options below.

Finish:

Select Options

Product №	Finish
189N19290	Black
189A19210	Silver

Description

Available in silver and black

The TYPE 1920 aluminum track is designed for the DAMA cabinet door sliding system. Recessed mounted for the top and bottom of the cabinet. For single door or bypassing applications by mounting the tracks parallel and spaced apart as per instructions. For installation and assembly, press-fit the track into the groove in the cabinet. An industrial adhesive for aluminum to wood may be used to hold the track securely (not included).

Features:
- Available in two finishes: silver and black anodized
- 78 in (2 m) length
- Can be cut to suit application

IMPORTANT: Use metric dimensions for greater accuracy during installation. Cut a groove in the floor and ceiling of the cabinet 10 mm wide by 7 mm deep as per the instructions.

ADVANTAGES AND BENEFITS

- Press-fit track
- Available in two finishes: silver and black anodized
- 78 in (2 m) length

TECHNICAL SPECIFICATIONS

Track type

Single Running, Single guiding

Overall Length

78 3/4 in*

Door Material

Wood, Glass

Weight Capacity per Door

66.1 lb*

Track Mounting

Recessed

Track Material

Anodized Aluminum

Material

Aluminum

Door Movement

Straight Sliding

Brand

Terno

Detailed Door Movement

Single sliding

Disclaimer

Measures shown with an asterisk (*) have been converted as per your preference. These are not the official measures. To view the measures specified by the manufacturer, click here.

INCLUDED PRODUCT(S)

1 rail

IMPORTANT INFORMATION

- IMPORTANT: Cut a groove in the floor and ceiling of the cabinet 10 mm wide by 7 mm deep as per the instructions.
- Please make sure to read the entirety of the installation manual before proceeding with the installation.
- Use metric dimensions for greater accuracy during installation.
- Wear safety gear such as gloves, safety glasses, safety shoes, and ear protection.
- Every fastener used to attach the track to the wall must be fastened securely into a structural surface.
- Always remove debris/dust/residues (sawdust and/or aluminum) from all tracks and guide channels using a dry cloth during installation and before operating the system.
- Never spray lubricant on this product.
- Do not exceed stated limitations and parameters. This will cause early wear and performance failure, and will void the warranty.

DISCLAIMER

Pictures provided for visual reference only: actual product may vary. - All required hardware should be ordered and obtained prior to initiating fabrication or installation work. Please verify that the parts and quantities listed in your order are correct before proceeding to checkout. - Always use instructions provided by the manufacturer, as included with the product. Manufacturer reserves the right to amend, modify, or otherwise supplement any previously issued product and/or technical information, as deemed required from time to time, without prior notice. - The documentation, drawings, and instructions on this page apply to the system described on this page only. Richelieu expressly declines all responsibility for any design or construction that combines this system with systems from this same manufacturer or systems from other manufacturers. - Installation of the product shall be executed by qualified individuals only, always ensuring that each product is securely installed using proper fixation methods, as appropriate for each applicable substratum. We trust that anyone installing these products has the required skills, knowledge, and experience. Richelieu expressly disclaims any liabilities for results obtained through improper use or installation.