ONWCATCLOSET23
TYPE 710 Aluminum Double Track
To add to cart, choose from the options below.
Silver anodized
The TYPE 710 aluminum double track is designed for the SCORRI FLAT cabinet, wardrobe, and closet door sliding system. It is surface mounted to the top of the cabinet or door opening. Can be installed next to TYPE 711 aluminum single track for triple bypassing door applications.
Features:
- Available in silver anodized
- Three different lengths: 78 in (2 m), 118 in (3 m), and 156 in (4 m)
- Can be cut to suit application
IMPORTANT: Use metric dimensions for greater accuracy during installation.
Features:
- Available in silver anodized
- Three different lengths: 78 in (2 m), 118 in (3 m), and 156 in (4 m)
- Can be cut to suit application
IMPORTANT: Use metric dimensions for greater accuracy during installation.
Product # | Overall Length |
---|---|
189A710210 | 78 3/4 in* |
189A710310 | 9 ft 10 in* |
189A710410 | 13 ft 1 in* |
ADVANTAGES AND BENEFITS
- Available in silver anodized
- Three different lengths: 78 in (2 m), 118 in (3 m), and 156 in (4 m)
- Can be cut to suit application
- Three different lengths: 78 in (2 m), 118 in (3 m), and 156 in (4 m)
- Can be cut to suit application
TECHNICAL SPECIFICATIONS
Detailed Door Movement
Bypassing
Track type
Double Running
Compatible with
Scorri FLAT
Door Installation
Top Hung
Load Capacity
110 lb*
Manufacturing Material
Aluminum
Track Mounting
Wall Mount
Width
1 9/16 in*
Finish
Silver
Door Material
Wood
Pre-drilled
No
Door Movement
Straight Sliding
Door Thickness
5/8 to 25/32 in*
Product type
Running and Guiding Tracks
Overall Height
1 3/32 in*
Height Clearance
1 3/8 in*
Application
Closet and Walk-In Closet, Wardrobe, Cabinet, Storage
Disclaimer
Measures shown with an asterisk (*) have been converted as per your preference. These are not the official measures. To view the measures specified by the manufacturer, click here.
IMPORTANT INFORMATION
- Please make sure to read the entirety of the installation manual before proceeding with the installation.
- Use metric dimensions for greater accuracy during installation.
- Wear safety gear such as gloves, safety glasses, safety shoes, and ear protection.
- Every fastener used to attach the track to the wall must be fastened securely into a structural surface.
- Always remove debris/dust/residues (sawdust and/or aluminum) from all tracks and guide channels using a dry cloth during installation and before operating the system.
- Never spray lubricant on this product.
- Do not exceed stated limitations and parameters. This will cause early wear and performance failure, and will void the warranty.
- Use metric dimensions for greater accuracy during installation.
- Wear safety gear such as gloves, safety glasses, safety shoes, and ear protection.
- Every fastener used to attach the track to the wall must be fastened securely into a structural surface.
- Always remove debris/dust/residues (sawdust and/or aluminum) from all tracks and guide channels using a dry cloth during installation and before operating the system.
- Never spray lubricant on this product.
- Do not exceed stated limitations and parameters. This will cause early wear and performance failure, and will void the warranty.
DISCLAIMER
Pictures provided for visual reference only: actual product may vary.
- All required hardware should be ordered and obtained prior to initiating fabrication or installation work. Please verify that the parts and quantities listed in your order are correct before proceeding to checkout.
- Always use instructions provided by the manufacturer, as included with the product. Manufacturer reserves the right to amend, modify, or otherwise supplement any previously issued product and/or technical information, as deemed required from time to time, without prior notice.
- The documentation, drawings, and instructions on this page apply to the system described on this page only. Richelieu expressly declines all responsibility for any design or construction that combines this system with systems from this same manufacturer or systems from other manufacturers.
- Installation of the product shall be executed by qualified individuals only, always ensuring that each product is securely installed using proper fixation methods, as appropriate for each applicable substratum. We trust that anyone installing these products has the required skills, knowledge, and experience. Richelieu expressly disclaims any liabilities for results obtained through improper use or installation.
- All required hardware should be ordered and obtained prior to initiating fabrication or installation work. Please verify that the parts and quantities listed in your order are correct before proceeding to checkout.
- Always use instructions provided by the manufacturer, as included with the product. Manufacturer reserves the right to amend, modify, or otherwise supplement any previously issued product and/or technical information, as deemed required from time to time, without prior notice.
- The documentation, drawings, and instructions on this page apply to the system described on this page only. Richelieu expressly declines all responsibility for any design or construction that combines this system with systems from this same manufacturer or systems from other manufacturers.
- Installation of the product shall be executed by qualified individuals only, always ensuring that each product is securely installed using proper fixation methods, as appropriate for each applicable substratum. We trust that anyone installing these products has the required skills, knowledge, and experience. Richelieu expressly disclaims any liabilities for results obtained through improper use or installation.