ONWCATCLOSET23
TYPE 730/A Plastic Guide Rail
Product # 189P730110
Length
Smooth sliding door
The TYPE 730/A plastic guide rail is designed to be inserted into a groove in the bottom of the wood door for smooth action to guide the door. Available in 39 in (1 m) size and can be cut to suit the width of the door. Cut a groove 3/8 in (10 mm) wide by 9/32 in (6.9 mm) along the bottom of the door, as per the instructions and technical drawings.
IMPORTANT: Use metric dimensions for greater accuracy during installation.
IMPORTANT: Use metric dimensions for greater accuracy during installation.
ADVANTAGES AND BENEFITS
- Press-fit track
- Smooth guide for the door
- Smooth guide for the door
TECHNICAL SPECIFICATIONS
Product #
189P730110
Detailed Door Movement
Single sliding
Track type
Guiding
Overall Length
39 3/8 in*
Manufacturing Material
Plastic
Drilling Depth
11/32 in*
Drilling
13/32 in*
Track Mounting
Recessed - Inside Ceiling
Door Material
Wood
Door Movement
Straight Sliding
Product type
Running and Guiding Tracks
Application
Closet and Walk-In Closet, Furniture, Cabinet, Storage
Disclaimer
Measures shown with an asterisk (*) have been converted as per your preference. These are not the official measures. To view the measures specified by the manufacturer, click here.
IMPORTANT INFORMATION
- IMPORTANT: Cut a groove 3/8 in (10 mm) wide by 9/32 in (6.9 mm) along the bottom of the door, as per the instructions and technical drawings.
- Please make sure to read the entirety of the installation manual before proceeding with the installation.
- Use metric dimensions for greater accuracy during installation.
- Wear safety gear such as gloves, safety glasses, safety shoes, and ear protection.
- Every fastener used to attach the track to the wall must be fastened securely into a structural surface.
- Always remove debris/dust/residues (sawdust and/or aluminum) from all tracks and guide channels using a dry cloth during installation and before operating the system.
- Never spray lubricant on this product.
- Do not exceed stated limitations and parameters. This will cause early wear and performance failure, and will void the warranty.
- Please make sure to read the entirety of the installation manual before proceeding with the installation.
- Use metric dimensions for greater accuracy during installation.
- Wear safety gear such as gloves, safety glasses, safety shoes, and ear protection.
- Every fastener used to attach the track to the wall must be fastened securely into a structural surface.
- Always remove debris/dust/residues (sawdust and/or aluminum) from all tracks and guide channels using a dry cloth during installation and before operating the system.
- Never spray lubricant on this product.
- Do not exceed stated limitations and parameters. This will cause early wear and performance failure, and will void the warranty.
DISCLAIMER
Pictures provided for visual reference only: actual product may vary.
- All required hardware should be ordered and obtained prior to initiating fabrication or installation work. Please verify that the parts and quantities listed in your order are correct before proceeding to checkout.
- Always use instructions provided by the manufacturer, as included with the product. Manufacturer reserves the right to amend, modify, or otherwise supplement any previously issued product and/or technical information, as deemed required from time to time, without prior notice.
- The documentation, drawings, and instructions on this page apply to the system described on this page only. Richelieu expressly declines all responsibility for any design or construction that combines this system with systems from this same manufacturer or systems from other manufacturers.
- Installation of the product shall be executed by qualified individuals only, always ensuring that each product is securely installed using proper fixation methods, as appropriate for each applicable substratum. We trust that anyone installing these products has the required skills, knowledge, and experience. Richelieu expressly disclaims any liabilities for results obtained through improper use or installation.
- All required hardware should be ordered and obtained prior to initiating fabrication or installation work. Please verify that the parts and quantities listed in your order are correct before proceeding to checkout.
- Always use instructions provided by the manufacturer, as included with the product. Manufacturer reserves the right to amend, modify, or otherwise supplement any previously issued product and/or technical information, as deemed required from time to time, without prior notice.
- The documentation, drawings, and instructions on this page apply to the system described on this page only. Richelieu expressly declines all responsibility for any design or construction that combines this system with systems from this same manufacturer or systems from other manufacturers.
- Installation of the product shall be executed by qualified individuals only, always ensuring that each product is securely installed using proper fixation methods, as appropriate for each applicable substratum. We trust that anyone installing these products has the required skills, knowledge, and experience. Richelieu expressly disclaims any liabilities for results obtained through improper use or installation.
