Type RM 026 Recessed Track

To buy, choose from the options below.
Overall Length: 78 3/4 in* 9 ft 10 in* Select Options

Description

Recess mount

The Type RM 026 recessed single track for RO 30 and RO 27 sliding door systems for cabinets with single, bypassing, and bi-parting applications.

Features:
- Anodized aluminum track, available in two sizes: 78 5/8 in (2 m) and 118 in (3 m)
- Press fit the track into a groove 5/16 in (8 mm) deep x 5/16 (8 mm) wide
- No need to use screws to secure the track, industrial adhesive for aluminum to wood can be used to install the track

IMPORTANT: Use metric dimensions for greater accuracy during installation.

ADVANTAGES AND BENEFITS

- Anodized aluminum track, available in two sizes: 78 5/8 in (2 m) and 118 in (3 m)
- Press fit the track into a groove 5/16 in (8 mm) deep x 5/16 (8 mm) wide
- No need to use screws to secure the track, industrial adhesive for aluminum to wood can be used to install the track

TECHNICAL SPECIFICATIONS

Track type
Single Running, Single guiding
Finish
Anodized Aluminum
Compatible with
RO 30, RO 27
Door Material
Wood
Weight Capacity per Door
44.1 lb*
Track Mounting
Recessed
Material
Aluminum
Overall Height
1/4 in*
Width
15/32 in*
Door Movement
Straight Sliding
Detailed Door Movement
Single sliding
Disclaimer

Measures shown with an asterisk (*) have been converted as per your preference. These are not the official measures. To view the measures specified by the manufacturer, click here.

INCLUDED PRODUCT(S)

1 track

IMPORTANT INFORMATION

IMPORTANT: For optimal performance make sure the dimensions of the door are balanced. It is suggested to build the door height 3 times or less than the width of the door (max. 1:3 ratio).
- Use metric dimensions for greater accuracy during installation.
- Please make sure to read the entirety of the installation manual before proceeding with the installation.
- Wear safety gear such as gloves, safety glasses, safety shoes, and ear protection.
- Every fastener used to attach the track to the wall must be fastened securely into a structural surface.
- Always remove debris/dust/residues (sawdust and/or aluminum) from all tracks and guide channels using a dry cloth during installation and before operating the system.
- Never spray lubricant on this product.
- Do not exceed stated limitations and parameters. This will cause early wear and performance failure, and will void the warranty.

RELATED DOCUMENTS

DISCLAIMER

Pictures provided for visual reference only: actual product may vary. - All required hardware should be ordered and obtained prior to initiating fabrication or installation work. Please verify that the parts and quantities listed in your order are correct before proceeding to checkout. - Always use instructions provided by the manufacturer, as included with the product. Manufacturer reserves the right to amend, modify, or otherwise supplement any previously issued product and/or technical information, as deemed required from time to time, without prior notice. - The documentation, drawings, and instructions on this page apply to the system described on this page only. Richelieu expressly declines all responsibility for any design or construction that combines this system with systems from this same manufacturer or systems from other manufacturers. - Installation of the product shall be executed by qualified individuals only, always ensuring that each product is securely installed using proper fixation methods, as appropriate for each applicable substratum. We trust that anyone installing these products has the required skills, knowledge, and experience. Richelieu expressly disclaims any liabilities for results obtained through improper use or installation.
Type RM 026 Recessed Track
Type RM 026 Recessed Track
To buy, choose from the options.