Line art
Type RM 030 Dual Upper Guide Track
To add to cart, choose from the options below.
Surface mount
The Type RM 030 Dual Upper Guide Track for RO 44 sliding door systems for cabinets for bypassing applications.
Features:
- Choose from two sizes of anodized aluminum tracks: 78 5/8 in (2000 mm) or 118 in (3000 mm)
- Surface mount the track for inset applications
- For maximum door thickness of 3/4 in (20 mm)
- Thicker doors are possible if the top of the door is rebated
IMPORTANT: Use metric dimensions for greater accuracy during installation.
Features:
- Choose from two sizes of anodized aluminum tracks: 78 5/8 in (2000 mm) or 118 in (3000 mm)
- Surface mount the track for inset applications
- For maximum door thickness of 3/4 in (20 mm)
- Thicker doors are possible if the top of the door is rebated
IMPORTANT: Use metric dimensions for greater accuracy during installation.
| Product # | Overall Length |
|---|---|
| 1892197A210 | 78 3/4 in* |
| 1892197A310 | 9 ft 10 in* |
ADVANTAGES AND BENEFITS
- Anodized aluminum track, available in two sizes: 78 5/8 in (2 m) and 118 in (3 m)
- Surface mount the track for inset applications
- For maximum door thickness of 3/4 in (20 mm)
- Surface mount the track for inset applications
- For maximum door thickness of 3/4 in (20 mm)
TECHNICAL SPECIFICATIONS
Track type
Double Guiding
Compatible with
RO 44
Load Capacity
132 lb*
Manufacturing Material
Aluminum
Track Mounting
Wall Mount
Width
2 7/32 in*
Finish
Anodized Aluminum
Door Material
Wood
Door Thickness
19/32 to 25/32 in*
Product type
Running and Guiding Tracks
Overall Height
31/32 in*
Application
Closet and Walk-In Closet, Wardrobe, Furniture, Cabinet
Disclaimer
Measures shown with an asterisk (*) have been converted as per your preference. These are not the official measures. To view the measures specified by the manufacturer, click here.
IMPORTANT INFORMATION
- Use metric dimensions for greater accuracy during installation.
- Please make sure to read the entirety of the installation manual before proceeding with the installation.
- Wear safety gear such as gloves, safety glasses, safety shoes, and ear protection.
- Every fastener used to attach the track to the wall must be fastened securely into a structural surface.
- Always remove debris/dust/residues (sawdust and/or aluminum) from all tracks and guide channels using a dry cloth during installation and before operating the system.
- Never spray lubricant on this product.
- Do not exceed stated limitations and parameters. This will cause early wear and performance failure.
- Please make sure to read the entirety of the installation manual before proceeding with the installation.
- Wear safety gear such as gloves, safety glasses, safety shoes, and ear protection.
- Every fastener used to attach the track to the wall must be fastened securely into a structural surface.
- Always remove debris/dust/residues (sawdust and/or aluminum) from all tracks and guide channels using a dry cloth during installation and before operating the system.
- Never spray lubricant on this product.
- Do not exceed stated limitations and parameters. This will cause early wear and performance failure.
DISCLAIMER
Pictures provided for visual reference only: actual product may vary.
- All required hardware should be ordered and obtained prior to initiating fabrication or installation work. Please verify that the parts and quantities listed in your order are correct before proceeding to checkout.
- Always use instructions provided by the manufacturer, as included with the product. Manufacturer reserves the right to amend, modify, or otherwise supplement any previously issued product and/or technical information, as deemed required from time to time, without prior notice.
- The documentation, drawings, and instructions on this page apply to the system described on this page only. Richelieu expressly declines all responsibility for any design or construction that combines this system with systems from this same manufacturer or systems from other manufacturers.
- Installation of the product shall be executed by qualified individuals only, always ensuring that each product is securely installed using proper fixation methods, as appropriate for each applicable substratum. We trust that anyone installing these products has the required skills, knowledge, and experience. Richelieu expressly disclaims any liabilities for results obtained through improper use or installation.
- All required hardware should be ordered and obtained prior to initiating fabrication or installation work. Please verify that the parts and quantities listed in your order are correct before proceeding to checkout.
- Always use instructions provided by the manufacturer, as included with the product. Manufacturer reserves the right to amend, modify, or otherwise supplement any previously issued product and/or technical information, as deemed required from time to time, without prior notice.
- The documentation, drawings, and instructions on this page apply to the system described on this page only. Richelieu expressly declines all responsibility for any design or construction that combines this system with systems from this same manufacturer or systems from other manufacturers.
- Installation of the product shall be executed by qualified individuals only, always ensuring that each product is securely installed using proper fixation methods, as appropriate for each applicable substratum. We trust that anyone installing these products has the required skills, knowledge, and experience. Richelieu expressly disclaims any liabilities for results obtained through improper use or installation.
