ONWCATCLOSET23
COMFORT 240 Soft Close Series
To add to cart, choose from the options below.
With Activator
The COMFORT 240 Soft Close series is for the RO 44 sliding door system for wood door weight capacity 15 - 40 kg (33 - 88 lbs) each. Simple installation. The soft close mechanism is concealed inside the ceiling with the upper guide tracks RM-030 and RM-055. The activator is included and mounted to the top of the door. Choose from two types of sets, single or double soft close mechanisms.
IMPORTANT: The recommended minimum door width is 700 mm (27 1/2 in).
For optimal performance, balance the dimensions of the door. It is suggested to build the door height three times or less than the width of the door (max. 1:3 ratio).
IMPORTANT: The recommended minimum door width is 700 mm (27 1/2 in).
For optimal performance, balance the dimensions of the door. It is suggested to build the door height three times or less than the width of the door (max. 1:3 ratio).
| Product # | Soft-Close Type |
|---|---|
| 1896770 | 1 soft close |
| 1896771 | 2 Soft Close |
ADVANTAGES AND BENEFITS
* Concealed direct mount soft close mechanism
* Includes activator
* Includes activator
TECHNICAL SPECIFICATIONS
Door Material
Wood
Load Capacity
15 to 40 kg
Manufacturing Material
Plastic
Width
40 mm
Door Width
700 to 1 219 mm
Door Thickness
20 mm
Product type
Stopper, Soft-Close
Overall Length
250 mm
Compatible with
RO 44
Soft-Closing
Yes
Overall Height
30 mm
Application
Closet and Walk-In Closet, Wardrobe, Pantry
Detailed Door Movement
Single sliding, Bypassing
Door Movement
Straight Sliding
SUGGESTED PRODUCTS
- Sliding Solutions for Cabinet and Furniture Applications
- Running and Guiding Tracks for Sliding Door Systems
IMPORTANT INFORMATION
IMPORTANT: For optimal performance, balance the dimensions of the door. It is suggested to build the door height three times or less than the width of the door (max. 1:3 ratio).
* Use metric dimensions for greater accuracy during installation.
* Please make sure to read the entirety of the installation manual before proceeding with the installation.
* Use metric dimensions for greater accuracy during installation
* wear safety gear such as gloves, safety glasses, safety shoes, and ear protection
* Every fastener used to attach the track to the wall must be fastened securely into a structural surface.
* Always remove debris/dust/residues (sawdust and/or aluminum) from all tracks and guide channels using a dry cloth during installation and before operating the system.
* Never spray lubricant on this product.
* Do not exceed stated limitations and parameters. This will cause early wear and performance failure.
* Use metric dimensions for greater accuracy during installation.
* Please make sure to read the entirety of the installation manual before proceeding with the installation.
* Use metric dimensions for greater accuracy during installation
* wear safety gear such as gloves, safety glasses, safety shoes, and ear protection
* Every fastener used to attach the track to the wall must be fastened securely into a structural surface.
* Always remove debris/dust/residues (sawdust and/or aluminum) from all tracks and guide channels using a dry cloth during installation and before operating the system.
* Never spray lubricant on this product.
* Do not exceed stated limitations and parameters. This will cause early wear and performance failure.
DISCLAIMER
By accessing or referring to this document, or by using any of Richelieu's websites, you accept all applicable terms as they apply from time to time. This legal disclaimer is in no way limited or altered by any other terms or conditions. Richelieu may change said terms at its discretion and without prior notice. A version of the most current terms will always be available on Richelieu's website.
The preceding information and technical documentation, information, or recommendations issued by Richelieu verbally or in writing is believed to be accurate and is given in good faith, but no representation of warranty as to its completeness or accuracy is made. Suggestions for use or application are only opinions. Users are responsible for determining the suitability of these products for their own particular purpose. No representation of warranty, expressed or implied, is made with respect to information or products including, without limitation, warranties or merchantability, fitness for particular purpose, non-infringement of any third party patent or other intellectual property rights including, without limit, copyright, trademark, and designs. Any trademarks identified herein are trademarks of the Richelieu group of companies.
Richelieu assumes no risk and shall not be subject to any liability for damages or loss resulting from the specific use or application made of the product. Richelieu's liability for any claim, whether based on breach of contract, negligence, or infringement of any rights of any party relating to the product shall not exceed the price paid for said products. In no event shall Richelieu be liable for any special, incidental, or consequential damages (including loss of use, loss of profit, and claims of third parties) however caused, whether by the negligence of Richelieu or otherwise.
Products returned for warranty purposes shall be subject to Richelieu's then applicable Return Policy.
The preceding information and technical documentation, information, or recommendations issued by Richelieu verbally or in writing is believed to be accurate and is given in good faith, but no representation of warranty as to its completeness or accuracy is made. Suggestions for use or application are only opinions. Users are responsible for determining the suitability of these products for their own particular purpose. No representation of warranty, expressed or implied, is made with respect to information or products including, without limitation, warranties or merchantability, fitness for particular purpose, non-infringement of any third party patent or other intellectual property rights including, without limit, copyright, trademark, and designs. Any trademarks identified herein are trademarks of the Richelieu group of companies.
Richelieu assumes no risk and shall not be subject to any liability for damages or loss resulting from the specific use or application made of the product. Richelieu's liability for any claim, whether based on breach of contract, negligence, or infringement of any rights of any party relating to the product shall not exceed the price paid for said products. In no event shall Richelieu be liable for any special, incidental, or consequential damages (including loss of use, loss of profit, and claims of third parties) however caused, whether by the negligence of Richelieu or otherwise.
Products returned for warranty purposes shall be subject to Richelieu's then applicable Return Policy.
