ONWCATINTBARN23
CS SoftStop 264
Product # TSBS100
Box
For heavy doors
The CS SoftStop 264 is a single-action soft close kit for the CS BARNDOOR sliding system for maximum weight capacity 120 kg (264 lbs) per door. The kit includes: one soft close mechanism and one activator; screws and fasteners for individual components only.
ADVANTAGES AND BENEFITS
- Soft Close heavy doors weighing up to 120 kg (264 lbs)
- Concealed behind the door track
- Concealed behind the door track
TECHNICAL SPECIFICATIONS
Product #
TSBS100
Door Material
Wood
Load Capacity
176 to 264 lb
Manufacturing Material
Steel, Plastic
Door Width
Min. 32 in
Door Thickness
1 1/4 to 1 3/4 in
Product type
Stopper
Track Mounting
Wall Mount
Number of Doors
1
Door Height
Max. 120 in
Soft-Closing
Yes
Application
Barn Door
Door Movement
Straight Sliding
INCLUDED PRODUCT(S)
- 1 soft close mechanism
- 1 activator for soft close
- Screws and fasteners for individual components only
- 1 fixing tool
- 1 activator for soft close
- Screws and fasteners for individual components only
- 1 fixing tool
IMPORTANT INFORMATION
- IMPORTANT: The minimum door width with soft-close mechanism is 32 in (810 mm)
- Please make sure to read the entirety of the installation manual before proceeding with installation.
- Wear safety gear such as gloves, safety glasses, safety shoes and ear protection
- Every fastener used to attach the track to the wall must be fastened securely into a structural surface.
- Always remove debris/dust/residue (sawdust and/or aluminum) from all tracks and guide channels using a dry cloth during installation and before operating the system.
- Never spray lubricant on this product.
- Do not exceed stated limitations and parameters. This will cause early wear and performance failure
- Please make sure to read the entirety of the installation manual before proceeding with installation.
- Wear safety gear such as gloves, safety glasses, safety shoes and ear protection
- Every fastener used to attach the track to the wall must be fastened securely into a structural surface.
- Always remove debris/dust/residue (sawdust and/or aluminum) from all tracks and guide channels using a dry cloth during installation and before operating the system.
- Never spray lubricant on this product.
- Do not exceed stated limitations and parameters. This will cause early wear and performance failure
