Instructions
HAWA PORTA Push-to-Open Device
Product # 893178071
Touch latch for pocket door
The HAWA PORTA Push-to-Open Device is designed to push open pocket doors weighing 88 lb (40 kg) to 220 lb (100 kg) each. Operation is done by applying a slight pressure to the door edge to activate a spring. The door will then move forward out of the pocket so that the door can be gripped and pulled out of the pocket.
Intended to work with the HAWA PORTA H systems.
Allows the door to be fully retracted into the pocket area to maximize doorway clearance.
Intended to work with the HAWA PORTA H systems.
Allows the door to be fully retracted into the pocket area to maximize doorway clearance.
ADVANTAGES AND BENEFITS
- Touch latch function for sliding doors
- Allows the door to be fully retracted into the pocket area to maximize doorway clearance
- Allows the door to be fully retracted into the pocket area to maximize doorway clearance
TECHNICAL SPECIFICATIONS
Product #
893178071
Door Material
Wood
Load Capacity
88.2 to 220 lb*
Manufacturing Material
Plastic
Width
15/16 in*
Door Width
21 5/8 to 63 in*
Product type
Stopper, Soft-Close
Track Mounting
Recessed - Inside Ceiling
Number of Doors
1
Overall Length
11 1/8 in*
Overall Height
1 5/32 in*
Detailed Door Movement
Single sliding
Door Movement
Straight Sliding
Disclaimer
Measures shown with an asterisk (*) have been converted as per your preference. These are not the official measures. To view the measures specified by the manufacturer, click here.
INCLUDED PRODUCT(S)
- 1 push-to-open device with self-closing feature
- 1 release piece for push-to-open device
- Set screws and fasteners for individual components only
- 1 release piece for push-to-open device
- Set screws and fasteners for individual components only
IMPORTANT INFORMATION
IMPORTANT:
- Use metric dimensions for greater accuracy during installation.
- The minimum door width with soft-close mechanism and push-to-open device is 31 1/2 in (800 mm).
- Please make sure to read the entirety of the installation manual before proceeding with the installation.
- Wear safety gear such as gloves, safety glasses, safety shoes, and ear protection.
- Every fastener used to attach the track to the wall must be fastened securely into a structural surface.
- Always remove debris/dust/residues (sawdust and/or aluminum) from all tracks and guide channels using a dry cloth during installation and before operating the system.
- Never spray lubricant on this product.
- Do not exceed stated limitations and parameters. This will cause early wear and performance failure, and will void the warranty.
- Use metric dimensions for greater accuracy during installation.
- The minimum door width with soft-close mechanism and push-to-open device is 31 1/2 in (800 mm).
- Please make sure to read the entirety of the installation manual before proceeding with the installation.
- Wear safety gear such as gloves, safety glasses, safety shoes, and ear protection.
- Every fastener used to attach the track to the wall must be fastened securely into a structural surface.
- Always remove debris/dust/residues (sawdust and/or aluminum) from all tracks and guide channels using a dry cloth during installation and before operating the system.
- Never spray lubricant on this product.
- Do not exceed stated limitations and parameters. This will cause early wear and performance failure, and will void the warranty.
DISCLAIMER
Pictures provided for visual reference only: actual product may vary.
- All required hardware should be ordered and obtained prior to initiating fabrication or installation work. Please verify that the parts and quantities listed in your order are correct before proceeding to checkout.
- Always use instructions provided by the manufacturer, as included with the product. Manufacturer reserves the right to amend, modify, or otherwise supplement any previously issued product and/or technical information, as deemed required from time to time, without prior notice.
- The documentation, drawings, and instructions on this page apply to the system described on this page only. Richelieu expressly declines all responsibility for any design or construction that combines this system with systems from this same manufacturer or systems from other manufacturers.
- Installation of the product shall be executed by qualified individuals only, always ensuring that each product is securely installed using proper fixation methods, as appropriate for each applicable substratum. We trust that anyone installing these products has the required skills, knowledge, and experience. Richelieu expressly disclaims any liabilities for results obtained through improper use or installation.
- All required hardware should be ordered and obtained prior to initiating fabrication or installation work. Please verify that the parts and quantities listed in your order are correct before proceeding to checkout.
- Always use instructions provided by the manufacturer, as included with the product. Manufacturer reserves the right to amend, modify, or otherwise supplement any previously issued product and/or technical information, as deemed required from time to time, without prior notice.
- The documentation, drawings, and instructions on this page apply to the system described on this page only. Richelieu expressly declines all responsibility for any design or construction that combines this system with systems from this same manufacturer or systems from other manufacturers.
- Installation of the product shall be executed by qualified individuals only, always ensuring that each product is securely installed using proper fixation methods, as appropriate for each applicable substratum. We trust that anyone installing these products has the required skills, knowledge, and experience. Richelieu expressly disclaims any liabilities for results obtained through improper use or installation.
