SoftMove 40-80-120 Door Size
HAWA-SoftMove Soft-Close Mechanism
Product # 8922444
Box
For wooden and glass sliding doors
The SoftMove soft-closing mechanism is an accessory for all HAWA-Junior 40-80-120 systems suitable for both wood and glass sliding doors.
- The mechanism is completely integrated into the upper running track.
- The SoftMove soft-closing mechanism gently decelerates sliding doors and draws them into their final position.
- Quick and easy to install with included installation aids.
- Uses a high quality hydraulic damper that is very quiet, with long-lasting and maintenance-free materials.
- The mechanism is completely integrated into the upper running track.
- The SoftMove soft-closing mechanism gently decelerates sliding doors and draws them into their final position.
- Quick and easy to install with included installation aids.
- Uses a high quality hydraulic damper that is very quiet, with long-lasting and maintenance-free materials.
| Product # | Load Capacity | Door Width | Compatible with |
|---|---|---|---|
| 8922444 | 80 kg | 690 to 1 030 mm | Hawa Junior 80 |
| 8925987 | 40 kg | 550 to 830 mm | Hawa Junior 40 |
| 8925988 | 120 kg | 850 to 1 150 mm | Hawa Junior 120 |
TECHNICAL SPECIFICATIONS
Product #
8922444
Soft-Close Type
One-Way Operation
Door Material
Wood, Glass
Finish
White
Manufacturing Material
Plastic
Product type
Soft-Close
Brand
Hawa
IMPORTANT INFORMATION
Pictures provided for visual reference only: actual product may vary.
All required hardware should be ordered and obtained prior to initiating fabrication or installation work. Please verify that the parts and quantity listed in your order are correct before proceeding to checkout.
Always use instructions provided by the manufacturer, as included with the product. Manufacturer reserves the right to amend, modify or otherwise supplement any previously issued product and/or technical information, as deemed required from time to time, without prior notice.
The documentation, drawings and instructions on this page apply to the system described on this page only. Richelieu expressly declines all responsibility for any design or construction that combines this system with systems from this same manufacturer or systems from other manufacturers.
Installation of the Product shall be executed by qualified individuals only, always ensuring that each product is securely installed using proper fixation methods, as appropriate for each applicable substratum. We trust that anyone installing these products has the required skills, knowledge and experience. Richelieu expressively disclaims any liabilities for results obtained through improper use or installation.
Always remove debris / dust / residues (sawdust and / or aluminum) from the rails using a dry cloth before installing carriage bearings.
Never spray lubricant.
All required hardware should be ordered and obtained prior to initiating fabrication or installation work. Please verify that the parts and quantity listed in your order are correct before proceeding to checkout.
Always use instructions provided by the manufacturer, as included with the product. Manufacturer reserves the right to amend, modify or otherwise supplement any previously issued product and/or technical information, as deemed required from time to time, without prior notice.
The documentation, drawings and instructions on this page apply to the system described on this page only. Richelieu expressly declines all responsibility for any design or construction that combines this system with systems from this same manufacturer or systems from other manufacturers.
Installation of the Product shall be executed by qualified individuals only, always ensuring that each product is securely installed using proper fixation methods, as appropriate for each applicable substratum. We trust that anyone installing these products has the required skills, knowledge and experience. Richelieu expressively disclaims any liabilities for results obtained through improper use or installation.
Always remove debris / dust / residues (sawdust and / or aluminum) from the rails using a dry cloth before installing carriage bearings.
Never spray lubricant.
DISCLAIMER
By accessing or referring to this document, or by using any of Richelieu's websites, you accept all applicable terms as they apply from time to time. This legal disclaimer is in no way limited or altered by any other terms or conditions. Richelieu may change said terms at its discretion and without prior notice. A version of the most current terms will always be available on Richelieu's website.
The preceding information and technical documentation, information or recommendations issued by Richelieu verbally or in writing is believed to be accurate and is given in good faith, but no representation of warranty as to its completeness or accuracy is made. Suggestions for use or application are only opinions. Users are responsible for determining the suitability of these products for their own particular purpose. No representation of warranty, expressed or implied, is made with respect to information or products including, without limitation, warranties or merchantability, fitness for particular purpose, non-infringement of any third party patent or other intellectual property rights including, without limit, copyright, trademark and designs. Any trademarks identified herein are trademarks of the Richelieu group of companies.
Richelieu assumes no risk and shall not be subject to any liability for damages or loss resulting from the specific use or application made of the product. Richelieu's liability for any claim, whether based on breach of contract, negligence, infringement of any rights of any party relating to the product shall not exceed the price paid for said products. In no event shall Richelieu be liable for any special, incidental or consequential damages (including loss of use, loss of profit and claims of third parties) however caused, whether by the negligence of Richelieu or otherwise.
Products returned for warranty purposes shall be subject to Richelieu's then applicable Return Policy.
The preceding information and technical documentation, information or recommendations issued by Richelieu verbally or in writing is believed to be accurate and is given in good faith, but no representation of warranty as to its completeness or accuracy is made. Suggestions for use or application are only opinions. Users are responsible for determining the suitability of these products for their own particular purpose. No representation of warranty, expressed or implied, is made with respect to information or products including, without limitation, warranties or merchantability, fitness for particular purpose, non-infringement of any third party patent or other intellectual property rights including, without limit, copyright, trademark and designs. Any trademarks identified herein are trademarks of the Richelieu group of companies.
Richelieu assumes no risk and shall not be subject to any liability for damages or loss resulting from the specific use or application made of the product. Richelieu's liability for any claim, whether based on breach of contract, negligence, infringement of any rights of any party relating to the product shall not exceed the price paid for said products. In no event shall Richelieu be liable for any special, incidental or consequential damages (including loss of use, loss of profit and claims of third parties) however caused, whether by the negligence of Richelieu or otherwise.
Products returned for warranty purposes shall be subject to Richelieu's then applicable Return Policy.
