ONWCATINDPCKT23
HAWA Spring Stop
To add to cart, choose from the options below.
With spring
The HAWA Spring Stop device is used to cushion a door stop with a spring for doors weighing up to 220 lb (100 kg) each.
Operation is done by applying a slight pressure to the door edge to activate a spring. The door will then move the door forward so that the door can be gripped and pulled out of the pocket.
Select from two options, HAWA PORTA H and JUNIOR 80/100 systems.
Allows the door to be fully retracted into the pocket area to maximize doorway clearance.
Operation is done by applying a slight pressure to the door edge to activate a spring. The door will then move the door forward so that the door can be gripped and pulled out of the pocket.
Select from two options, HAWA PORTA H and JUNIOR 80/100 systems.
Allows the door to be fully retracted into the pocket area to maximize doorway clearance.
| Product # | Load Capacity | Compatible with |
|---|---|---|
| 8927760 | 66.1 to 220 lb* | HAWA PORTA |
| 8925370 | 90.4 to 220 lb* | Hawa Junior 80 / Hawa Junior 100 |
ADVANTAGES AND BENEFITS
- Touch latch function for sliding doors
- Allows the door to be fully retracted into the pocket area to maximize doorway clearance
- Allows the door to be fully retracted into the pocket area to maximize doorway clearance
TECHNICAL SPECIFICATIONS
Door Material
Wood
Door Installation
Top Hung
Manufacturing Material
Aluminum
Width
15/16 in*
Door Width
21 5/8 to 59 in*
Product type
Stopper
Track Mounting
Recessed - Inside Ceiling
Number of Doors
1
Overall Length
1 11/16 in*
Overall Height
31/32 in*
Application
Pocket Door
Detailed Door Movement
Single sliding
Door Movement
Straight Sliding
Disclaimer
Measures shown with an asterisk (*) have been converted as per your preference. These are not the official measures. To view the measures specified by the manufacturer, click here.
IMPORTANT INFORMATION
IMPORTANT: Use metric dimensions for greater accuracy during installation.
- Please make sure to read the entirety of the installation manual before proceeding with the installation.
- Wear safety gear such as gloves, safety glasses, safety shoes, and ear protection.
- Every fastener used to attach the track to the wall must be fastened securely into a structural surface.
- Always remove debris/dust/residues (sawdust and/or aluminum) from all tracks and guide channels using a dry cloth during installation and before operating the system.
- Never spray lubricant on this product.
- Do not exceed stated limitations and parameters. This will cause early wear and performance failure.
- Please make sure to read the entirety of the installation manual before proceeding with the installation.
- Wear safety gear such as gloves, safety glasses, safety shoes, and ear protection.
- Every fastener used to attach the track to the wall must be fastened securely into a structural surface.
- Always remove debris/dust/residues (sawdust and/or aluminum) from all tracks and guide channels using a dry cloth during installation and before operating the system.
- Never spray lubricant on this product.
- Do not exceed stated limitations and parameters. This will cause early wear and performance failure.
DISCLAIMER
Pictures provided for visual reference only: actual product may vary.
- All required hardware should be ordered and obtained prior to initiating fabrication or installation work. Please verify that the parts and quantities listed in your order are correct before proceeding to checkout.
- Always use instructions provided by the manufacturer, as included with the product. Manufacturer reserves the right to amend, modify, or otherwise supplement any previously issued product and/or technical information, as deemed required from time to time, without prior notice.
- The documentation, drawings, and instructions on this page apply to the system described on this page only. Richelieu expressly declines all responsibility for any design or construction that combines this system with systems from this same manufacturer or systems from other manufacturers.
- Installation of the product shall be executed by qualified individuals only, always ensuring that each product is securely installed using proper fixation methods, as appropriate for each applicable substratum. We trust that anyone installing these products has the required skills, knowledge, and experience. Richelieu expressly disclaims any liabilities for results obtained through improper use or installation.
- All required hardware should be ordered and obtained prior to initiating fabrication or installation work. Please verify that the parts and quantities listed in your order are correct before proceeding to checkout.
- Always use instructions provided by the manufacturer, as included with the product. Manufacturer reserves the right to amend, modify, or otherwise supplement any previously issued product and/or technical information, as deemed required from time to time, without prior notice.
- The documentation, drawings, and instructions on this page apply to the system described on this page only. Richelieu expressly declines all responsibility for any design or construction that combines this system with systems from this same manufacturer or systems from other manufacturers.
- Installation of the product shall be executed by qualified individuals only, always ensuring that each product is securely installed using proper fixation methods, as appropriate for each applicable substratum. We trust that anyone installing these products has the required skills, knowledge, and experience. Richelieu expressly disclaims any liabilities for results obtained through improper use or installation.
