E-GLIDE Unfinished Maple Wood Ladder

Product # 88GE609215

Pre-machined and pre-drilled

The E-GLIDE unfinished maple wood ladder is 92 in (2.33 m) long and made for an installation hook at a height of 88 1/4 in (2.24 m) to 89 1/4 in (2.26 m).

Features:
- Standard 16 in (406 mm) wide x 92 in (2.33 m) long ladder
- Unassembled, pre-cut, and pre-machined
- Ready for finishing and assembly
- Weight capacity of 300 lb (136 kg)
- Sanded to 180 grit

IMPORTANT: Designed to work only with the E-GLIDE Hook Ladder hardware set, reference the E-GLIDE Ladder WEBKITS for guidance with examples of installation options.

ADVANTAGES AND BENEFITS

- Efficient small packaging for easy storage and shipping
- Pre-machined
- Ready to be finished and assembled

TECHNICAL SPECIFICATIONS

Product #
88GE609215
Door Movement
Straight Sliding
Packaging Format
Box
Ladder Width
16 in
Ladder Hook-On Height
88 1/4 to 89 1/4 in
Load Capacity
300 lb
Application
Library
Overall Length
92 in
Manufacturing Material
Wood, Maple

INCLUDED PRODUCT(S)

- 2 side rails
- 7 steps

IMPORTANT INFORMATION

- Please make sure to read the entirety of the installation manual before proceeding with the installation.
- Wear safety gear such as gloves, safety glasses, safety shoes, and ear protection.
- See the instructions for rough opening and other dimensions.
- Always remove debris/dust/residues (sawdust and/or aluminum) from all tracks and guide channels using a dry cloth during installation and before operating the system.
- Never spray lubricant.
- Do not exceed stated limitations and parameters. This will cause early wear and performance failure, and will void the warranty.
- Pictures provided for visual reference only: actual product may vary.

RELATED DOCUMENTS

DISCLAIMER

- Please make sure to read the entirety of the installation manual before proceeding with the installation.
- Wear safety gear such as gloves, safety glasses, safety shoes, and ear protection.
- Every fastener used to attach the track to the wall must be fastened securely into a structural surface.
- Always remove debris/dust/residues (sawdust and/or aluminum) from all tracks and guide channels using a dry cloth during installation and before operating the system.
- Never spray lubricant.
- Do not exceed stated limitations and parameters. This will cause early wear and performance failure, and will void the warranty.
- Pictures provided for visual reference only: actual product may vary.
- All required hardware should be ordered and obtained prior to initiating fabrication or installation work. Please verify that the parts and quantities listed in your order are correct before proceeding to checkout.
- Always use instructions provided by the manufacturer, as included with the product. Manufacturer reserves the right to amend, modify, or otherwise supplement any previously issued product and/or technical information, as deemed required from time to time, without prior notice.
- The documentation, drawings, and instructions on this page apply to the system described on this page only. Richelieu expressly declines all responsibility for any design or construction that combines this system with systems from this same manufacturer or systems from other manufacturers.
- Installation of the product shall be executed by qualified individuals only, always ensuring that each product is securely installed using proper fixation methods, as appropriate for each applicable substratum. We trust that anyone installing these products has the required skills, knowledge, and experience. Richelieu expressly disclaims any liabilities for results obtained through improper use or installation.