Instructions
Cavity Sliders CS HEAVYDUTY Sliding System
Product # WEBKIT1242707
Quick-release mounting plate
The CAVITY SLIDERS HEAVYDUTY M10 Sliding System is designed for large and heavy doors weighing up to 1100 lb (500 kg) each.
Features:
- Mounting suspension plate to the top of the door for mounting and quick-releasing the upper trolley without tools
- Large wheel trolleys with precision ground bearings for smooth running
- Track stoppers and built-in stop mounted to the suspension provide a secure connection to stop the door. Use a floor door stop to prolong the performance of the hardware.
- Ceiling mount aluminum track can be joined with connecting pins
- Floor mounted T-GUIDE to stabilize the door standard, must cut a groove at the bottom of the door
- Optional recessed floor guide channel for greater stability when doors are wider than 48 in (1.2 m)
- Simple and flexible low-cost installation
An ideal solution for large commercial projects, divider doors, and wall partitions.
Features:
- Mounting suspension plate to the top of the door for mounting and quick-releasing the upper trolley without tools
- Large wheel trolleys with precision ground bearings for smooth running
- Track stoppers and built-in stop mounted to the suspension provide a secure connection to stop the door. Use a floor door stop to prolong the performance of the hardware.
- Ceiling mount aluminum track can be joined with connecting pins
- Floor mounted T-GUIDE to stabilize the door standard, must cut a groove at the bottom of the door
- Optional recessed floor guide channel for greater stability when doors are wider than 48 in (1.2 m)
- Simple and flexible low-cost installation
An ideal solution for large commercial projects, divider doors, and wall partitions.
| Product # | Detailed Door Movement | Overall Length | Door Width |
|---|---|---|---|
| WEBKIT1242707 | Biparting | 4.88 m* | 91.4 to 119 cm* |
| WEBKIT1242710 | Biparting | 9.75 m* | 1.22 to 2.44 m* |
| WEBKIT1242709 | Bypassing | 9.75 m* | 91.4 to 244 cm* |
| WEBKIT1242708 | Single sliding | 4.88 m* | 91.4 to 183 cm* |
ADVANTAGES AND BENEFITS
- Mounting suspension plate for the top of the door for mounting and quick releasing the upper trolley without tools
- Adjustable height
- Track can be cut and joined with pins
- Adjustable height
- Track can be cut and joined with pins
INCLUDED IN THIS WEBKIT
TECHNICAL SPECIFICATIONS
Product #
WEBKIT1242707
Door Material
Aluminum/Metal Frame, Wood
Door Movement
Straight Sliding, Movable Wall
Track Mounting
Ceiling Mount
Load Capacity
499 kg*
Door Thickness
44.5 to 76 mm*
Roller Type
Premium Ball Bearing
Roller Position
Upper
Application
Screen Panel
Brand
Cavity Sliders
Track type
Box Track
Running Track Fixing
Surface and Recessed
Manufacturing Material
Aluminum
Stopper
Two
Groove Depth
19.8 mm*
Groove Needed for Guiding System
Yes
Door Projection
77 mm*
Door Installation
Top Hung
Number of Doors
2
Door Height
3.66 m*
Groove Width at the Bottom of Door
6.35 mm*
Disclaimer
Measures shown with an asterisk (*) have been converted as per your preference. These are not the official measures. To view the measures specified by the manufacturer, click here.
SUGGESTED PRODUCTS
- Door Guides for Sliding Door Systems
- Running and Guiding Tracks for Sliding Door Systems
IMPORTANT INFORMATION
Please make sure to read the entirety of the installation manual before proceeding with the installation.
A groove is required for the bottom of the door for the floor guide, see instructions.
Use a floor guide and channel for stability for doors 48 in (1.2 m) wide and greater.
Always remove debris/dust/residues (sawdust and/or aluminum) from all tracks and guide channels using a dry cloth during installation and before operating the system.
A groove is required for the bottom of the door for the floor guide, see instructions.
Use a floor guide and channel for stability for doors 48 in (1.2 m) wide and greater.
Always remove debris/dust/residues (sawdust and/or aluminum) from all tracks and guide channels using a dry cloth during installation and before operating the system.
DISCLAIMER
Please make sure to read the entirety of the installation manual before proceeding with the installation. #8 screws and appropriate anchors required for installation (not included). A groove is required for the bottom of the door for the floor guide, see instructions. Wear safety gear such as gloves, safety glasses, safety shoes, and ear protection. See instructions for rough opening and other dimensions. Do not exceed stated limitations and parameters. This will cause early wear and performance failure, and will void the warranty.
- Pictures provided for visual reference only: actual product may vary.
- All required hardware should be ordered and obtained prior to initiating fabrication or installation work. Please verify that the parts and quantities listed in your order are correct before proceeding to checkout.
- Always use instructions provided by the manufacturer, as included with the product. Manufacturer reserves the right to amend, modify, or otherwise supplement any previously issued product and/or technical information, as deemed required from time to time, without prior notice.
- The documentation, drawings, and instructions on this page apply to the system described on this page only. Richelieu expressly declines all responsibility for any design or construction that combines this system with systems from this same manufacturer or systems from other manufacturers.
- Installation of the product shall be executed by qualified individuals only, always ensuring that each product is securely installed using proper fixation methods, as appropriate for each applicable substratum. We trust that anyone installing these products has the required skills, knowledge, and experience. Richelieu expressly disclaims any liabilities for results obtained through improper use or installation.
- Always remove debris/dust/residues (sawdust and/or aluminum) from all tracks and guide channels using a dry cloth during installation and before operating the system.
- Never spray lubricant on this product.
- Pictures provided for visual reference only: actual product may vary.
- All required hardware should be ordered and obtained prior to initiating fabrication or installation work. Please verify that the parts and quantities listed in your order are correct before proceeding to checkout.
- Always use instructions provided by the manufacturer, as included with the product. Manufacturer reserves the right to amend, modify, or otherwise supplement any previously issued product and/or technical information, as deemed required from time to time, without prior notice.
- The documentation, drawings, and instructions on this page apply to the system described on this page only. Richelieu expressly declines all responsibility for any design or construction that combines this system with systems from this same manufacturer or systems from other manufacturers.
- Installation of the product shall be executed by qualified individuals only, always ensuring that each product is securely installed using proper fixation methods, as appropriate for each applicable substratum. We trust that anyone installing these products has the required skills, knowledge, and experience. Richelieu expressly disclaims any liabilities for results obtained through improper use or installation.
- Always remove debris/dust/residues (sawdust and/or aluminum) from all tracks and guide channels using a dry cloth during installation and before operating the system.
- Never spray lubricant on this product.
