Line art PS66 MAN
CINETTO PS66 Pocket Door System
No visible tracks
The CINETTO PS66 Pocket Door System is an innovative sliding door mechanism with fully concealed tracks for a single wood door with a maximum weight of 50 kg (110 lb).
Includes dampers to cushion stop the door for a soft close action. The unique Y-mechanism retracts the door into a pocket area straight and prevents the door from racking.
A vertical profile supports the along door vertical door edge for door thickness from 25 to 40 mm (1 to 1-1/2 in) and height from 2100 to 2400 mm (83 to 94 in). Special order systems are available upon request for tall doors up to 3000 mm (118 in) and glass doors 8 mm (5/16 in) thick. Consult with Richelieu Sliding Door Specialist.
Installation is flexible and ideal for applications without ceiling support and adaptable for a wall, cabinet, and other millwork. The pocket area is intended to be covered by panel boards. Ideal for Office Cubicles; Millwork, and to create kitchen walk-in pantries and closets; and standard passage doors.
The B-moved electric system can be bolt-on and concealed within the pocket area to operate the door hands-free with a remote; WAVE proximity sensor (sold separately). Compatible with Smart Home devices, cellphone AP's, and Voice Control devices (consult a certified electrician).
IMPORTANT: Use metric dimensions for greater accuracy during installation.
Measures shown with an asterisk (*) have been converted as per your preference. These are not the official measures. To view the measures specified by the manufacturer, click here.
- Can be installed where there is no ceiling
- Hands-Free B-moved electric motor (sold separately)
Please make sure to read the entirety of the installation manual before proceeding with the installation.
Always remove debris/dust/residues (sawdust and/or aluminum) from all tracks and guide channels using a dry cloth during installation and before operating the system.
Never spray lubricant on this product.
Do not exceed stated limitations and parameters. This will cause early wear and performance failure.
When using the B-moved system, consult with a certified electrician before installation to ensure you have a proper power source.