Line art
CS Cavity Sliders Pocket Door Kit
To add to cart, choose from the options below.
Complete pocket kit
The CS Cavity Sliders Pocket Door Kit is designed for single sliding wood doors weighing up to 200 lb (90 kg) and 500 lb (227 kg) each. Made for standard 2 x 4 wood and metal wall stud construction.
Features:
Choose from three types of kits for various door widths and heights:
- Door widths of 36 in (914 mm) and 48 in (1.2 m)
- Door heights of 80 in (2 m) and 96 in (2.4 m)
Two types of carriage/hardware sets with one stopper to choose from:
- M6 for 200 lb (90 kg) door
- M8 for 500 lb (227 kg) door
- CarriSnap mounting suspension plate for the top of the door for mounting and releasing the upper trolley without tools
- Sturdy double wall aluminum pocket frame structure can be cut to size to accommodate different door widths and heights
- Low profile upper track is part of the structure of the pocket frame
- Trim clips for easy press-on mounting for door jamb trim
- Pivoting bottom guide to ease loading the door into the pocket frame during installation
- Large wheel trolleys with precision ground bearings for smooth running
- Simple and flexible low-cost installation
- Cut a groove bottom of the door to conceal floor guide
For soft-close options, refer to the CS Cavity Sliders Pocket Door System in the Suggested Products section below.
For bi-parting applications use connecting pin item no. ZK00305 to line up and connect two systems.
Ideal for residential, commercial, and institutional projects for a wide variety of applications, such as doorways for bedrooms, washrooms, utility rooms, offices, etc.
Features:
Choose from three types of kits for various door widths and heights:
- Door widths of 36 in (914 mm) and 48 in (1.2 m)
- Door heights of 80 in (2 m) and 96 in (2.4 m)
Two types of carriage/hardware sets with one stopper to choose from:
- M6 for 200 lb (90 kg) door
- M8 for 500 lb (227 kg) door
- CarriSnap mounting suspension plate for the top of the door for mounting and releasing the upper trolley without tools
- Sturdy double wall aluminum pocket frame structure can be cut to size to accommodate different door widths and heights
- Low profile upper track is part of the structure of the pocket frame
- Trim clips for easy press-on mounting for door jamb trim
- Pivoting bottom guide to ease loading the door into the pocket frame during installation
- Large wheel trolleys with precision ground bearings for smooth running
- Simple and flexible low-cost installation
- Cut a groove bottom of the door to conceal floor guide
For soft-close options, refer to the CS Cavity Sliders Pocket Door System in the Suggested Products section below.
For bi-parting applications use connecting pin item no. ZK00305 to line up and connect two systems.
Ideal for residential, commercial, and institutional projects for a wide variety of applications, such as doorways for bedrooms, washrooms, utility rooms, offices, etc.
Product # | Load Capacity | Overall Length | Door Height | Door Width |
---|---|---|---|---|
CS3068 | 200 lb | 72 in | Max. 80 in | Max. 36 in |
CS3080 | 200 lb | 72 in | Max. 96 in | Max. 36 in |
CS4080 | 500 lb | 96 in | Max. 96 in | Max. 48 in |
ADVANTAGES AND BENEFITS
- CarriSnap mounting suspension plate for the top of the door for mounting and releasing the upper trolley without tools
- Sturdy double wall aluminum pocket frame structure can be cut to size to accommodate different door widths and heights
- Low profile upper track is part of the structure of the pocket frame
- Trim clips for easy press-on mounting for door jamb trim
- Pivoting bottom guide to ease loading the door into the pocket frame during installation
- Sturdy double wall aluminum pocket frame structure can be cut to size to accommodate different door widths and heights
- Low profile upper track is part of the structure of the pocket frame
- Trim clips for easy press-on mounting for door jamb trim
- Pivoting bottom guide to ease loading the door into the pocket frame during installation
TECHNICAL SPECIFICATIONS
Door Material
Wood
Door Movement
Pocket Door
Detailed Door Movement
Single sliding
Track Mounting
Ceiling Mount
Door Position
Concealed Inside Wall
Door Thickness
1 3/8 to 1 3/4 in
Roller Type
Ball Bearing
Roller Position
Upper
Application
Pocket Door
Brand
Cavity Sliders
Screw/Nail Included
No
Drilling
1 in
Drilling Depth
0.5 in
Packaging Format
Box
Track type
Box Track
Running Track Fixing
Recessed
Manufacturing Material
Aluminum
Finish
Anodized
Adjustable
Yes
Soft-Closing
No
Stopper
One
Displayed in These Showrooms
Mississauga
Product type
Pocket Door
Groove Depth
1 in
Groove Needed for Guiding System
Yes
Door Installation
Top Hung
Number of Doors
1
Groove Width at the Bottom of Door
1/4 in
SUGGESTED PRODUCTS
- Mounting Accessories
- Sliding Solutions for Architectural Applications
- Stoppers and Soft-Close Mechanisms
INCLUDED PRODUCT(S)
Main box includes:
- Aluminum double wall frame structure
- Upper track
- 2 upper trolleys
- 2 CarriSnap mounting suspension plates
- Track stopper
- Floor guide
- Adjustment tool
- Screws and fasteners for individual components only
- Aluminum double wall frame structure
- Upper track
- 2 upper trolleys
- 2 CarriSnap mounting suspension plates
- Track stopper
- Floor guide
- Adjustment tool
- Screws and fasteners for individual components only
IMPORTANT INFORMATION
Please make sure to read the entirety of the installation manual before proceeding with the installation.
A groove is required for the bottom of the door for the floor guide, see instructions.
Always remove debris/dust/residues (sawdust and/or aluminum) from all tracks and guide channels using a dry cloth during installation and before operating the system.
Never spray lubricant on this product.
Do not exceed stated limitations and parameters. This will cause early wear and performance failure.
A groove is required for the bottom of the door for the floor guide, see instructions.
Always remove debris/dust/residues (sawdust and/or aluminum) from all tracks and guide channels using a dry cloth during installation and before operating the system.
Never spray lubricant on this product.
Do not exceed stated limitations and parameters. This will cause early wear and performance failure.
DISCLAIMER
Please make sure to read the entirety of the installation manual before proceeding with the installation. #8 screws and appropriate anchors required for installation (not included).
A groove is required for the bottom of the door for the floor guide, see instructions. Wear safety gear such as gloves, safety glasses, safety shoes, and ear protection. See instructions for rough opening and other dimensions. Do not exceed stated limitations and parameters. This will cause early wear and performance failure, and will void the warranty.
- Pictures provided for visual reference only: actual product may vary.
- All required hardware should be ordered and obtained prior to initiating fabrication or installation work. Please verify that the parts and quantities listed in your order are correct before proceeding to checkout.
- Always use instructions provided by the manufacturer, as included with the product. Manufacturer reserves the right to amend, modify, or otherwise supplement any previously issued product and/or technical information, as deemed required from time to time, without prior notice.
- The documentation, drawings, and instructions on this page apply to the system described on this page only. Richelieu expressly declines all responsibility for any design or construction that combines this system with systems from this same manufacturer or systems from other manufacturers.
- Installation of the product shall be executed by qualified individuals only, always ensuring that each product is securely installed using proper fixation methods, as appropriate for each applicable substratum. We trust that anyone installing these products has the required skills, knowledge, and experience. Richelieu expressly disclaims any liabilities for results obtained through improper use or installation.
- Always remove debris/dust/residues (sawdust and/or aluminum) from all tracks and guide channels using a dry cloth during installation and before operating the system.
- Never spray lubricant on this product.
A groove is required for the bottom of the door for the floor guide, see instructions. Wear safety gear such as gloves, safety glasses, safety shoes, and ear protection. See instructions for rough opening and other dimensions. Do not exceed stated limitations and parameters. This will cause early wear and performance failure, and will void the warranty.
- Pictures provided for visual reference only: actual product may vary.
- All required hardware should be ordered and obtained prior to initiating fabrication or installation work. Please verify that the parts and quantities listed in your order are correct before proceeding to checkout.
- Always use instructions provided by the manufacturer, as included with the product. Manufacturer reserves the right to amend, modify, or otherwise supplement any previously issued product and/or technical information, as deemed required from time to time, without prior notice.
- The documentation, drawings, and instructions on this page apply to the system described on this page only. Richelieu expressly declines all responsibility for any design or construction that combines this system with systems from this same manufacturer or systems from other manufacturers.
- Installation of the product shall be executed by qualified individuals only, always ensuring that each product is securely installed using proper fixation methods, as appropriate for each applicable substratum. We trust that anyone installing these products has the required skills, knowledge, and experience. Richelieu expressly disclaims any liabilities for results obtained through improper use or installation.
- Always remove debris/dust/residues (sawdust and/or aluminum) from all tracks and guide channels using a dry cloth during installation and before operating the system.
- Never spray lubricant on this product.