Datasheet
HAWA JUNIOR 100 GP System
Product # WEBKIT1246052
For multi-layer glass
The HAWA JUNIOR 100 GP System is for sliding glass doors weighing up to 100 kg (220 lb) each. This is a top-running sliding system equipped with a secure clamp-patch fitting for solid or multi-layer glass up to 12.7 mm (1/2 in) thick. Select the standard hardware set with SoftStop dampers or upgrade to the innovative SoftMove magnetic soft close mechanism with low opening forces of less than 22 N.
Features:
- For glass thickness of 8 to 12.7 mm (5/16 in to 1/2 in)
Track options:
- Surface or recessed anodized ceiling track
- Wall mount with angle profile
- Removeable track for pocket door applications
- Single track with pocket for stationary glass
Round or square cover caps for clamp patch fitting are available in Satin Silver, Brushed Stainless Steel Look, and Chrome Plated finishes.
SoftStop track stopper with damper and adjustable retention spring resists door bounce back
SoftMove magnetic soft close mechanism with less than 22 N pull force is available.
Minimum door width: 800 mm (31 1/2 in) for soft close in both directions; can be used for pocket doors.
Covered by a factory performance guarantee of 15 years for private residential use and 7 years for commercial use (reference terms and conditions for more information).
Optional spring-loaded stopper is available to push open pocket doors.
An ideal solution for residential, commercial, and institutional projects, suitable for for kitchens, offices, examination and consultation rooms in medical clinics, meeting rooms, bedrooms and washrooms.
IMPORTANT: Use metric dimensions for greater accuracy during installation.
Glass must be drilled as per instructions for clamp patch fitting.
Features:
- For glass thickness of 8 to 12.7 mm (5/16 in to 1/2 in)
Track options:
- Surface or recessed anodized ceiling track
- Wall mount with angle profile
- Removeable track for pocket door applications
- Single track with pocket for stationary glass
Round or square cover caps for clamp patch fitting are available in Satin Silver, Brushed Stainless Steel Look, and Chrome Plated finishes.
SoftStop track stopper with damper and adjustable retention spring resists door bounce back
SoftMove magnetic soft close mechanism with less than 22 N pull force is available.
Minimum door width: 800 mm (31 1/2 in) for soft close in both directions; can be used for pocket doors.
Covered by a factory performance guarantee of 15 years for private residential use and 7 years for commercial use (reference terms and conditions for more information).
Optional spring-loaded stopper is available to push open pocket doors.
An ideal solution for residential, commercial, and institutional projects, suitable for for kitchens, offices, examination and consultation rooms in medical clinics, meeting rooms, bedrooms and washrooms.
IMPORTANT: Use metric dimensions for greater accuracy during installation.
Glass must be drilled as per instructions for clamp patch fitting.
| Product # | Track Mounting | Load Capacity | Overall Length | Soft-Closing |
|---|---|---|---|---|
| WEBKIT1246052 | Ceiling Mount | 176 to 220 lb* | 13 ft 1 in* | Yes |
| WEBKIT1246005 | Ceiling Mount | 176 to 220 lb* | 78 3/4 in* | Yes |
| WEBKIT1246051 | Ceiling Mount | 176 to 220 lb* | 98 3/8 in* | Yes |
| WEBKIT1246007 | Ceiling Mount | 176 to 220 lb* | 9 ft 10 in* | Yes |
| WEBKIT1246006 | Recessed - Inside Ceiling | 176 to 220 lb* | 98 3/8 in* | Yes |
| WEBKIT1245999 | Wall Mount | 88.2 to 220 lb* | 80 1/8 in* | No |
| WEBKIT1246001 | Wall Mount | 88.2 to 220 lb* | 99 3/4 in* | No |
| WEBKIT1246003 | Wall Mount | 88.2 to 220 lb* | 9 ft 11 in* | No |
| WEBKIT1246000 | Wall Mount | 176 to 220 lb* | 80 1/8 in* | Yes |
| WEBKIT1246002 | Wall Mount | 176 to 220 lb* | 99 3/4 in* | Yes |
| WEBKIT1246004 | Wall Mount | 176 to 220 lb* | 9 ft 11 in* | Yes |
ADVANTAGES AND BENEFITS
- Clamp-patch fitting for solid and multi-layer glass
- SoftStop track stopper with damper and adjustable retention spring to resist door bounce back
- SoftMove magnetic soft close mechanism with less than 22 N pull force
- Minimum door width 800 mm (31-1/2 in) for soft close in both directions
- Factory performance guarantee of 15 years for private residential use and 7 years for commercial use (see terms and conditions for more information)
- Optional spring-loaded stopper for opening pocket doors
- SoftStop track stopper with damper and adjustable retention spring to resist door bounce back
- SoftMove magnetic soft close mechanism with less than 22 N pull force
- Minimum door width 800 mm (31-1/2 in) for soft close in both directions
- Factory performance guarantee of 15 years for private residential use and 7 years for commercial use (see terms and conditions for more information)
- Optional spring-loaded stopper for opening pocket doors
INCLUDED IN THIS WEBKIT
Length of 4 linear meter
Length of 4 linear meter
TECHNICAL SPECIFICATIONS
Product #
WEBKIT1246052
Door Material
Glass
Door Movement
Straight Sliding
Roller Type
Ball Bearing
Roller Position
Upper
Application
Pocket Door
Brand
Hawa
Track type
Box Track
Compatible with
Hawa Junior 100 GP
Glass Thickness
5/16 to 1/2 in*
Manufacturing Material
Aluminum
Finish
Anodized, Matte Chrome (174)
Adjustable
Yes
Soft-Close Type
Magnet
Stopper
Two
Standards and Certifications
ADA
Door Installation
Top Hung
Door Height
39 3/8 to 157 in*
Door Width
31 1/2 to 59 in*
Brand Model
Hawa Junior 80/100
Disclaimer
Measures shown with an asterisk (*) have been converted as per your preference. These are not the official measures. To view the measures specified by the manufacturer, click here.
IMPORTANT INFORMATION
- Pictures provided for visual reference only: actual product may vary.
- All required hardware should be ordered and obtained prior to initiating fabrication or installation work. Please verify that the parts and quantities listed in your order are correct before proceeding to checkout.
- Always use instructions provided by the manufacturer, as included with the product. The manufacturer reserves the right to amend, modify, or otherwise supplement any previously issued product and/or technical information, as deemed required from time to time, without prior notice.
- The documentation, drawings, and instructions on this page apply to the system described on this page only. Richelieu expressly declines all responsibility for any design or construction that combines this system with systems from this same manufacturer or systems from other manufacturers.
- Installation of the product shall be executed by qualified individuals only, always ensuring that each product is securely installed using proper fixation methods, as appropriate for each applicable substrate. We trust that anyone installing these products has the required skills, knowledge, and experience. Richelieu expressly disclaims any liabilities for results obtained through improper use or installation.
- Always remove debris/dust/residue (sawdust and/or aluminum) from all tracks and guide channels using a dry cloth during installation and before operating the system.
- Never spray lubricant on this product.
- All required hardware should be ordered and obtained prior to initiating fabrication or installation work. Please verify that the parts and quantities listed in your order are correct before proceeding to checkout.
- Always use instructions provided by the manufacturer, as included with the product. The manufacturer reserves the right to amend, modify, or otherwise supplement any previously issued product and/or technical information, as deemed required from time to time, without prior notice.
- The documentation, drawings, and instructions on this page apply to the system described on this page only. Richelieu expressly declines all responsibility for any design or construction that combines this system with systems from this same manufacturer or systems from other manufacturers.
- Installation of the product shall be executed by qualified individuals only, always ensuring that each product is securely installed using proper fixation methods, as appropriate for each applicable substrate. We trust that anyone installing these products has the required skills, knowledge, and experience. Richelieu expressly disclaims any liabilities for results obtained through improper use or installation.
- Always remove debris/dust/residue (sawdust and/or aluminum) from all tracks and guide channels using a dry cloth during installation and before operating the system.
- Never spray lubricant on this product.
DISCLAIMER
By accessing or referring to this document, or by using any of Richelieu's websites, you accept all applicable terms as they apply from time to time. This legal disclaimer is in no way limited or altered by any other terms or conditions. Richelieu may change said terms at its discretion and without prior notice. A version of the most current terms will always be available on Richelieu's website.
The preceding information and technical documentation, information, or recommendations issued by Richelieu verbally or in writing is believed to be accurate and is given in good faith, but no representation of warranty as to its completeness or accuracy is made. Suggestions for use or application are only opinions. Users are responsible for determining the suitability of these products for their own particular purpose. No representation of warranty, expressed or implied, is made with respect to information or products including, without limitation, warranties or merchantability, fitness for particular purpose, non-infringement of any third party patent or other intellectual property rights including, without limit, copyright, trademark, and designs. Any trademarks identified herein are trademarks of the Richelieu group of companies.
Richelieu assumes no risk and shall not be subject to any liability for damages or loss resulting from the specific use or application made of the product. Richelieu's liability for any claim, whether based on breach of contract, negligence, or infringement of any rights of any party relating to the product shall not exceed the price paid for said products. In no event shall Richelieu be liable for any special, incidental, or consequential damages (including loss of use, loss of profit, and claims of third parties) however caused, whether by the negligence of Richelieu or otherwise.
Products returned for warranty purposes shall be subject to Richelieu's then applicable Return Policy.
The preceding information and technical documentation, information, or recommendations issued by Richelieu verbally or in writing is believed to be accurate and is given in good faith, but no representation of warranty as to its completeness or accuracy is made. Suggestions for use or application are only opinions. Users are responsible for determining the suitability of these products for their own particular purpose. No representation of warranty, expressed or implied, is made with respect to information or products including, without limitation, warranties or merchantability, fitness for particular purpose, non-infringement of any third party patent or other intellectual property rights including, without limit, copyright, trademark, and designs. Any trademarks identified herein are trademarks of the Richelieu group of companies.
Richelieu assumes no risk and shall not be subject to any liability for damages or loss resulting from the specific use or application made of the product. Richelieu's liability for any claim, whether based on breach of contract, negligence, or infringement of any rights of any party relating to the product shall not exceed the price paid for said products. In no event shall Richelieu be liable for any special, incidental, or consequential damages (including loss of use, loss of profit, and claims of third parties) however caused, whether by the negligence of Richelieu or otherwise.
Products returned for warranty purposes shall be subject to Richelieu's then applicable Return Policy.
