Datasheet PORTA HC
HAWA PORTA 100 H/HC/HMT KIT Series
Product № | Detailed Door Movement | Track Mounting | Weight Capacity per Door | Door Thickness | Door Width | Soft-Closing |
---|---|---|---|---|---|---|
893141K210 | Single sliding | Ceiling Mount | 132 to 220 lb* | 1 3/16 to 3 5/32 in* | 23 7/8 to 39 3/8 in* | No |
893181K210 | Pocket door | Recessed | 134 to 220 lb* | 1 3/16 to 3 5/32 in* | 31 1/2 to 39 3/8 in* | Yes |
893143K210 | Barn door | Wall Mount | 132 to 220 lb* | 1 3/16 to 1 9/16 in* | 23 7/8 to 39 3/8 in* | No |
Description
Includes track
The HAWA PORTA 100 H/HC/HMT KIT Series is a collection of sliding wood door systems engineered for a wide variety of installations. Each kit is made for single wood door with a capacity of up to 100 kg (220 lbs) including hardware set, track and unique components to enhance performance.
Select from the following:
- System H for basic ceiling mount
- System HC for wall mount including a clip-on anodized aluminum fascia
- System HMT for pocket door with soft-close mechanism and push-to-open device. With the HMT system, the door can be retracted completely into the pocket and with a push on the door edge, the door will spring forward.
IMPORTANT: Use metric dimensions for greater accuracy during installation. Cut a groove 12 mm x 16 mm at the bottom of the door for bottom guide.
An ideal solution for residential and commercial applications for standard doorways, walk-in closets, and office entrance doors.
TECHNICAL SPECIFICATIONS
Measures shown with an asterisk (*) have been converted as per your preference. These are not the official measures. To view the measures specified by the manufacturer, click here.
SUGGESTED PRODUCTS
- Stoppers and Soft-Close Mechanisms
- Door Guides for Sliding Door Systems
- Sliding Solutions for Architectural Applications
INCLUDED PRODUCT(S)
- 2 upper wheels with suspension bolts
- 2 suspension brackets
- 2 stops
- 1 floor guide
- 1 78 3/4 in (2 m) track
- 1 track cleaner
- Screws and fasteners for individual components only
HC series includes:
- 2 upper wheels with suspension bolts
- 2 suspension brackets
- 2 stops
- 1 floor guide
- 1 78 3/4 in (2 m) track
- 1 78 3/4 in (2 m) clip-on fascia
- 5 clips for aluminum or wood fascia
- 2 end caps
- 1 track cleaner
- Screws and fasteners for individual components only
HMT series includes:
- 2 upper wheels with suspension bolts
- 2 suspension housings
- 2 supports for upper wheels
- 2 stops
- 1 soft close for 132 lb (61 kg) to 220 lb (100 kg) door
- 1 activator for soft close
- 1 Push-To-Open device for 88 lb (40 kg) to 220 lb (100 kg) door
- 1 release piece for Push-To-Open
- 1 floor guide
- 1 78 3/4 in (2 m) track
- 9 clips for track
- 1 track cleaner
- Screws and fasteners for individual components only
IMPORTANT INFORMATION
- Use metric dimensions for greater accuracy during installation.
- Please make sure to read the entirety of the installation manual before proceeding with the installation.
- Wear safety gear such as gloves, safety glasses, safety shoes, and ear protection.
- Every fastener used to attach the track to the wall must be fastened securely into a structural surface.
- Always remove debris/dust/residues (sawdust and/or aluminum) from all tracks and guide channels using a dry cloth during installation and before operating the system.
- Never spray lubricant on this product.
- Do not exceed stated limitations and parameters. This will cause early wear and performance failure, and will void the warranty.