SEQUANZIATO RO 82 Multiple Sliding Door Series

Product # WEBKIT1245290

Without floor track

The SEQUANZIATO RO 82 is for multiple sliding wood doors without a bottom floor channel. An easy-to-install, quality hardware option for two or three 35 mm (1-3/8 in) thick doors.
Clip-on fascia can be applied on the front or back for an elegant finish. Flexible and direct mount installation.

IMPORTANT: Use metric dimensions for greater accuracy during installation. Cut a groove at the bottom of the door 21 mm x 18 mm (7/8 in x 3/4 in) for twin guide rails.

An ideal solution for residential and commercial applications including closets, room dividers, meeting rooms, restaurants, and other applications requiring multiple sliding doors.
Load Capacity: 33.1 to 220 lb* Overall Length: 9 ft 10 in* Soft-Closing: No Door Installation: Right hand to left open Left hand to right open Number of Doors: 3 Door Width: 23 5/8 to 43 1/4 in* Modify Options
Product # Load Capacity Overall Length Soft-Closing Door Installation Number of Doors Door Width
WEBKIT1245290 33.1 to 220 lb* 9 ft 10 in* No Right hand to left open 3 23 5/8 to 43 1/4 in*
WEBKIT1245293 33.1 to 88.2 lb* 13 ft 1 in* Yes Right hand to left open 3 25 5/8 to 45 1/4 in*
WEBKIT1245291 33.1 to 220 lb* 78 3/4 in* No Left hand to right open 2 23 5/8 to 29 7/8 in*
WEBKIT1245289 33.1 to 220 lb* 78 3/4 in* No Right hand to left open 2 23 5/8 to 29 7/8 in*
WEBKIT1245292 33.1 to 220 lb* 9 ft 10 in* No Left hand to right open 3 23 5/8 to 43 1/4 in*

TECHNICAL SPECIFICATIONS

Product #
WEBKIT1245290
Door Material
Wood
Door Movement
Movable Wall
Detailed Door Movement
Bypassing, Telescoping
Track Mounting
Ceiling Mount
Door Thickness
1 3/8 to 1 9/16 in*
Roller Type
Ball Bearing
Roller Position
Upper
Track type
Box Track
Compatible with
RO 82
Manufacturing Material
Aluminum
Stopper
Two
Groove Needed for Guiding System
Yes
Milling Depth
13/16 in*
Bottom Guide
Yes
Door Height
47 1/4 to 118 in*
Groove Width at the Bottom of Door
23/32 in*
Disclaimer

Measures shown with an asterisk (*) have been converted as per your preference. These are not the official measures. To view the measures specified by the manufacturer, click here.

DISCLAIMER

Please make sure to read the entirety of the installation manual before proceeding with the installation. #8 screws and appropriate anchors required for installation (not included). A groove is required for the bottom of the door for the floor guide, see instructions. Wear safety gear such as gloves, safety glasses, safety shoes, and ear protection. See instructions for rough opening and other dimensions. Do not exceed stated limitations and parameters. This will cause early wear and performance failure and void the warranty.

- Pictures are provided for visual reference only: the actual product may vary.
- All required hardware should be ordered and obtained prior to initiating fabrication or installation work. Please verify that the parts and quantities listed in your order are correct before proceeding to checkout.
- Always use instructions provided by the manufacturer, as included with the product. The manufacturer reserves the right to amend, modify, or otherwise supplement any previously issued product and/or technical information, as deemed required from time to time, without prior notice.
- The documentation, drawings, and instructions on this page apply to the system described on this page only. Richelieu expressly declines all responsibility for any design or construction that combines this system with systems from this same manufacturer or systems from other manufacturers.
- Installation of the product shall be executed by qualified individuals only, always ensuring that each product is securely installed using proper fixation methods, as appropriate for each applicable substratum. We trust that anyone installing these products has the required skills, knowledge, and experience. Richelieu expressly disclaims any liabilities for results obtained through improper use or installation.
- Always remove debris/dust/residues (sawdust and/or aluminum) from all tracks and guide channels using a dry cloth during installation and before operating the system.
- Never spray lubricant on this product.