The Diamond Brass Kit with 2 m Rail

Product # 24608160

Complete kit for one door

Complete set of decorative steel hardware in a satin brass finish, designed for easy installation of a standard sized wood door.
The kit is designed for a single sliding wood door and includes a 6 1/2 ft (2 m) rail.

Installation tip: the dimension from the top of the door to the top of the wheel hanger is 5 1/8 in (130 mm), provide 3/4 in (20 mm) additional space between top of the wheel hanger and the ceiling.


Ball bearing rollers for smooth and quiet operation.
Simple installation for the upper roller hardware, surface mounted onto the door without drilling for through bolts.
Rails are pre-drilled at every 17.7 in (450 mm) for the installation of five wall mounted brackets.

Safety: each roller unit is equipped with a device that prevents derailment during rough use of the door.


Product #
Door Material
Door Movement
Straight Sliding
Detailed Door Movement
Single sliding
Track Mounting
Wall Mount
Load Capacity
33.1 to 220 lb*
Door Position
In Front of Wall
Door Thickness
1 3/8 to 1 3/4 in
Roller Type
Ball Bearing
Roller Position
Closet and Walk-In Closet, Standard Access Door, Barn Door
Height Clearance
5 11/32 in*
Overall Length
78 3/4 in*
Packaging Format
PVC and Clear Foam
Track type
Flat Bar
Manufacturing Material
Brass, Satin Brass
Product type
Overall Depth
2 7/8 in*
Door Projection
2 23/32 in*
Door Installation
Top Hung
Number of Doors
Door Height
9 ft 10 in*
Door Width
24 to 36 in

Measures shown with an asterisk (*) have been converted as per your preference. These are not the official measures. To view the measures specified by the manufacturer, click here.


- 1 rail measuring 78.74 in (2 m)
- 2 roller units for 1 3/8 in (34.9 mm) or 1 3/4 in (44.45 mm) thick door
- 2 end bumpers
- 5 wall mounted brackets
- 2 anti-derailment devices
- 1 floor mount door guide

Screws for components included.


Door and handles not included. It is recommended to use a solid or glass door in order to obtain the minimum weight to reduce noise. Use a wider door than the opening to avoid angled views and preserve privacy. For example, use a door 34 in (863 mm) wide for an opening of 30 in (762 mm). The bottom of the door requires a groove for the concealed guiding system.

Total projection from the wall is 2 7/8 in (73 mm) including door thickness and hardware.
The gap between door to wall is 3/8 in (11 mm) to 7/8 in (21 mm) depending on door thickness.

Preparation: Remove the frame moldings or install a piece of wood (not included) of the same thickness and length before setting the new hardware in place to ensure there is enough clearance for the door. Always make sure that the product is properly attached or installed using appropriate fixing material. An additional anchor may be required for installation (sold separately).

- Pictures provided for visual reference only: actual product may vary.
- All required hardware should be ordered and obtained prior to initiating fabrication or installation work. Please verify that the parts and quantities listed in your order are correct before proceeding to checkout.
- Always use instructions provided by the manufacturer, as included with the product. Manufacturer reserves the right to amend, modify, or otherwise supplement any previously issued product and/or technical information, as deemed required from time to time, without prior notice.
- The documentation, drawings, and instructions on this page apply to the system described on this page only. Richelieu expressly declines all responsibility for any design or construction that combines this system with systems from this same manufacturer or systems from other manufacturers.
- Installation of the product shall be executed by qualified individuals only, always ensuring that each product is securely installed using proper fixation methods, as appropriate for each applicable substratum. We trust that anyone installing these products has the required skills, knowledge, and experience. Richelieu expressly disclaims any liabilities for results obtained through improper use or installation.
- Always remove debris/dust/residues (sawdust and/or aluminum) from all tracks and guide channels using a dry cloth during installation and before operating the system.
- Never spray lubricant.



By accessing or referring to this document, or by using any of Richelieu's websites, you accept all applicable terms as they apply from time to time. This legal disclaimer is in no way limited or altered by any other terms or conditions. Richelieu may change said terms at its discretion and without prior notice. A version of the most current terms will always be available on Richelieu's website.

The preceding information and technical documentation, information, or recommendations issued by Richelieu verbally or in writing is believed to be accurate and is given in good faith, but no representation of warranty as to its completeness or accuracy is made. Suggestions for use or application are only opinions. Users are responsible for determining the suitability of these products for their own particular purpose. No representation of warranty, expressed or implied, is made with respect to information or products including, without limitation, warranties or merchantability, fitness for particular purpose, non-infringement of any third party patent or other intellectual property rights including, without limit, copyright, trademark, and designs. Any trademarks identified herein are trademarks of the Richelieu group of companies.

Richelieu assumes no risk and shall not be subject to any liability for damages or loss resulting from the specific use or application made of the product. Richelieu's liability for any claim, whether based on breach of contract, negligence, or infringement of any rights of any party relating to the product shall not exceed the price paid for said products. In no event shall Richelieu be liable for any special, incidental, or consequential damages (including loss of use, loss of profit, and claims of third parties) however caused, whether by the negligence of Richelieu or otherwise.

Products returned for warranty purposes shall be subject to Richelieu's then applicable Return Policy.