The Ferris Wheel Hardware Set

Product #: 24602090


Oversize roller hardware set for wood doors

The Ferris Wheel is a hardware set with 2 big 120 mm trolleys/rollers and end track stoppers for wood doors. The hardware set includes all the basic fittings for 1 wood door; see below to view the list of all the components included in the basic hardware set. Sold separately, you may select from 3 different length track sets that include basic wall mounts and fasteners. The tracks are pre-drilled for the wall mounts and for machines to accept connector plates (sold separately) to join tracks. Also the back of the track is machined to accept soft-close mechanisms (sold separately). For residential applications.


Requires ONE of the following products

Flat Bar Track/Rail, Wall Mount Matte Black Product no. 24600190
  • Track Length: 78 3/4 in*
  • Number of Doors: 1
Flat Bar Track/Rail, Wall Mount Matte Black Product no. 24600290
  • Track Length: 98 3/8 in*
  • Number of Doors: 2 / 1
Flat Bar Track/Rail, Wall Mount Matte Black Product no. 24600390
  • Track Length: 9 ft 10 in*
  • Number of Doors: 2 / 1


Product number
Door Material
Door Movement
Straight Sliding
Detailed Door Movement
Barn Door
Track Mounting
Wall Mount
Packaging Format
Door Projection
3 5/32 in*
Height Clearance
7 19/32 in*
Weight Capacity per Door
33.1 to 220 lb*
Number of Doors
Door Thickness
1 3/8 to 1 3/4 in
Door Width
24 to 60 in
Door Height
8 ft 6 in*
Roller Type
Ball Bearing
Roller Position
Track Material
Track Length
78 3/4 to 118 in*
Product Type
Track Finish
Track Type
Flat Bar
Set Screws Included
Door Installation
Top Hung
Black (90)

Measures shown with an asterisk (*) have been converted as per your preference. These are not the official measures. To view the measures specified by the manufacturer, click here.


Rails are available in three lengths to allow you to install two kits end-to-end on the same rail.
Rails are pre-drilled at each end to allow for connector plates (sold separately) to join tracks and pre-machined threaded holes to add on a soft-close mechanism (sold separately).

Security: Each roller unit is equipped with a device that prevents derailment during rough use of the door.


- 2 trolley/roller units (120 mm wheels) with through bolt fasteners for 1-3/8" or 1-3/4" door
- 2 end bumpers with screws
- 2 anti-derailer units with screws
- 1 floor-level guide for wood door with screws


- Pictures provided for visual reference only: actual product may vary.

- All required hardware should be ordered and obtained prior to initiating fabrication or installation work. Please verify that the parts and quantities listed in your order are correct before proceeding to checkout.
- Always use instructions provided by the manufacturer, as included with the product. Manufacturer reserves the right to amend, modify, or otherwise supplement any previously issued product and/or technical information, as deemed required from time to time, without prior notice.
- The documentation, drawings, and instructions on this page apply to the system described on this page only. Richelieu expressly declines all responsibility for any design or construction that combines this system with systems from this same manufacturer or systems from other manufacturers.
- Installation of the product shall be executed by qualified individuals only, always ensuring that each product is securely installed using proper fixation methods, as appropriate for each applicable substratum. We trust that anyone installing these products has the required skills, knowledge, and experience. Richelieu expressly disclaims any liabilities for results obtained through improper use or installation.
- Always remove debris/dust/residues (sawdust and/or aluminum) from all tracks and guide channels using a dry cloth during installation and before operating the system.
- Never spray lubricant.


By accessing or referring to this document, or by using any of Richelieu's websites, you accept all applicable terms as they apply from time to time. This legal disclaimer is in no way limited or altered by any other terms or conditions. Richelieu may change said terms at its discretion and without prior notice. A version of the most current terms will always be available on Richelieu's website. The preceding information and technical documentation, information, or recommendations issued by Richelieu verbally or in writing is believed to be accurate and is given in good faith, but no representation of warranty as to its completeness or accuracy is made. Suggestions for use or application are only opinions. Users are responsible for determining the suitability of these products for their own particular purpose. No representation of warranty, expressed or implied, is made with respect to information or products including, without limitation, warranties or merchantability, fitness for particular purpose, non-infringement of any third party patent or other intellectual property rights including, without limit, copyright, trademark, and designs. Any trademarks identified herein are trademarks of the Richelieu group of companies. Richelieu assumes no risk and shall not be subject to any liability for damages or loss resulting from the specific use or application made of the product. Richelieu's liability for any claim, whether based on breach of contract, negligence, or infringement of any rights of any party relating to the product shall not exceed the price paid for said products. In no event shall Richelieu be liable for any special, incidental, or consequential damages (including loss of use, loss of profit, and claims of third parties) however caused, whether by the negligence of Richelieu or otherwise. Products returned for warranty purposes shall be subject to Richelieu's then applicable Return Policy.
The Ferris Wheel Hardware Set

Product number: 24602090