CINETTO B-MOVED + PS40 Motorized Coplanar System

To add to cart, choose from the options below.

UL Listed

The Cinetto B-MOVED + PS40 Motorized coplanar sliding door System is designed for two-door configurations bypassing or biparting.
The doors can be moved and controlled hands-free several in ways: push to the door; remote; WAVE proximity sensor (sold separately).
Compatible with Smart Home devices, cellphone AP's, and Voice Control devices (refer to a certified electrician). Installation is simple, with a bolt-on motion transmission bar behind the standard PS40.1 or PS40.2 sliding door systems.
Two door brackets set to links the motion transmission bar to the upper running carriage unit. The control unit is powered by a UL Listed power supply with a standard 3-prong plug for use in a typical North American 120-volt wall outlet.

IMPORTANT: Select the correct motion transmission bar type for the correct door width range. WAVE sensor must be located within 10 meters (32'-0") from the receiver and sensors. WAVE sensors read through a maximum 10 mm (3/8") thick wood, glass, or stone material.
Use metric dimensions for greater accuracy during installation.

Door width range per transmission bar:
Typ A: 888 - 1296 mm Typ B: 1164 - 1800 mm

Ideal solution for hands-free and barrier-free applications for wardrobes, kitchen pantries, TV & Entertainment Units, Storage units.
Detailed Door Movement: Biparting Bypassing Single sliding Number of Doors: 1 2 4 Overall Length: 96 1/2 in* 9 ft 10 in* 11 ft 9 in* 16 ft* Opening: Remote Wave Sensor Door Width: 35 to 35 3/8 in* 35 to 48 in* 45 3/8 to 60 in* Select Options
Product # Detailed Door Movement Number of Doors Overall Length Opening Door Width
WEBKIT1245613 Biparting 2 16 ft* Wave Sensor 35 to 48 in*
WEBKIT1245610 Bypassing 2 96 1/2 in* Remote 35 to 48 in*
WEBKIT1245611 Bypassing 4 11 ft 9 in* Wave Sensor 35 to 35 3/8 in*
WEBKIT1245612 Single sliding 1 9 ft 10 in* Remote 45 3/8 to 60 in*


- Easy to assemble.
- Vertical adjustment: 6 mm +/- 4 mm.
- Track can be assembled without screws thanks to the new clip-on system.


Door Material
Door Movement
Track Mounting
Surface - Outside the Cabinet
Load Capacity
66.1 to 132 lb*
Door Position
Full Overlay
Door Thickness
3/4 to 1 11/16 in*
Wardrobe, Pantry, Storage
Door Height
47 1/4 to 118 in*
Brand Model
Cinetto PS40, Cinetto B-Moved

Measures shown with an asterisk (*) have been converted as per your preference. These are not the official measures. To view the measures specified by the manufacturer, click here.


  • Mounting Accessories
  • Sliding Solutions for Cabinet and Furniture Applications
  • Premium Panels
  • Functional Panels


- Use metric dimensions for greater accuracy during installation.
- When using the B-moved system, consult with a certified electrician before installation to ensure you have a proper power source.
- Pictures provided for visual reference only: actual product may vary.
- All required hardware should be ordered and obtained prior to initiating fabrication or installation work. Please verify that the parts and quantities listed in your order are correct before proceeding to checkout.
- Always use instructions provided by the manufacturer, as included with the product. Manufacturer reserves the right to amend, modify, or otherwise supplement any previously issued product and/or technical information, as deemed required from time to time, without prior notice.
- The documentation, drawings, and instructions on this page apply to the system described on this page only. Richelieu expressly declines all responsibility for any design or construction that combines this system with systems from this same manufacturer or systems from other manufacturers.
- Installation of the product shall be executed by qualified individuals only, always ensuring that each product is securely installed using proper fixation methods, as appropriate for each applicable substratum. We trust that anyone installing these products has the required skills, knowledge, and experience. Richelieu expressly disclaims any liabilities for results obtained through improper use or installation.
- Always remove debris/dust/residues (sawdust and/or aluminum) from all tracks and guide channels using a dry cloth during installation and before operating the system.
- Never spray lubricant.


By accessing or referring to this document, or by using any of Richelieu's websites, you accept all applicable terms as they apply from time to time. This legal disclaimer is in no way limited or altered by any other terms or conditions. Richelieu may change said terms at its discretion and without prior notice. A version of the most current terms will always be available on Richelieu's website.

The preceding information and technical documentation, information, or recommendations issued by Richelieu verbally or in writing is believed to be accurate and is given in good faith, but no representation of warranty as to its completeness or accuracy is made. Suggestions for use or application are only opinions. Users are responsible for determining the suitability of these products for their own particular purpose. No representation of warranty, expressed or implied, is made with respect to information or products including, without limitation, warranties or merchantability, fitness for particular purpose, non-infringement of any third party patent or other intellectual property rights including, without limit, copyright, trademark, and designs. Any trademarks identified herein are trademarks of the Richelieu group of companies.

Richelieu assumes no risk and shall not be subject to any liability for damages or loss resulting from the specific use or application made of the product. Richelieu's liability for any claim, whether based on breach of contract, negligence, or infringement of any rights of any party relating to the product shall not exceed the price paid for said products. In no event shall Richelieu be liable for any special, incidental, or consequential damages (including loss of use, loss of profit, and claims of third parties) however caused, whether by the negligence of Richelieu or otherwise.

Products returned for warranty purposes shall be subject to Richelieu's then applicable Return Policy.