Line art
SLIDE 40 Sliding Door System
Product # WEBKIT1242998
Concealed low profile soft-close mechanisms
The SLIDE 40 sliding cabinet wood door system with concealed low profile for inset applications with a door weight capacity of 88 lb (40 kg) each.
Features:
- For wood doors 3/4 in (18 mm) to 1 in (25 mm) thick
- 2 recessed low profile soft-close mechanisms
- Rollers are equipped with anti-derailment springs
- Select from two recessed track lengths: 78 1/4 in (1.99 m) and 117 5/8 in (2.99 m)
- Simple and flexible installation
IMPORTANT: The minimum door width with soft-close mechanism is 27 1/2 in (700 mm).
Cut a groove for the track 19/32 in (15 mm) wide x 15/32 in (12 mm) deep. Use metric dimensions for greater accuracy during installation.
Ideal solution for office furniture, bookcases/libraries, kitchen cabinets, closets, wardrobes/armoires, and other millwork applications.
Features:
- For wood doors 3/4 in (18 mm) to 1 in (25 mm) thick
- 2 recessed low profile soft-close mechanisms
- Rollers are equipped with anti-derailment springs
- Select from two recessed track lengths: 78 1/4 in (1.99 m) and 117 5/8 in (2.99 m)
- Simple and flexible installation
IMPORTANT: The minimum door width with soft-close mechanism is 27 1/2 in (700 mm).
Cut a groove for the track 19/32 in (15 mm) wide x 15/32 in (12 mm) deep. Use metric dimensions for greater accuracy during installation.
Ideal solution for office furniture, bookcases/libraries, kitchen cabinets, closets, wardrobes/armoires, and other millwork applications.
| Product # | Overall Length | Soft-Closing | Door Width |
|---|---|---|---|
| WEBKIT1242998 | 9 ft 9 in* | Yes | 27 1/2 to 48 in* |
| WEBKIT1242997 | 78 3/8 in* | No | 23 7/8 to 39 in* |
| WEBKIT1242996 | 78 3/8 in* | Yes | 27 1/2 to 39 in* |
ADVANTAGES AND BENEFITS
- 2 recessed low profile soft-close mechanisms
- Rollers are equipped with anti-derailment springs
- Select from two recessed track lengths: 78 1/4 in (1.99 m) and 117 5/8 in (2.99 m)
- Simple and flexible installation
- Rollers are equipped with anti-derailment springs
- Select from two recessed track lengths: 78 1/4 in (1.99 m) and 117 5/8 in (2.99 m)
- Simple and flexible installation
INCLUDED IN THIS WEBKIT
TECHNICAL SPECIFICATIONS
Product #
WEBKIT1242998
Door Material
Wood
Door Movement
Straight Sliding
Detailed Door Movement
Bypassing
Track Mounting
Recessed - Inside the Cabinet
Load Capacity
88.2 lb*
Door Position
Inset/Inlay
Door Thickness
23/32 to 31/32 in*
Roller Position
Lower
Application
Closet and Walk-In Closet, Wardrobe, Furniture, Cabinet
Number of Doors
2
Door Height
Max. 96 in*
Door Installation
Bottom Running
Manufacturing Material
Aluminum
Disclaimer
Measures shown with an asterisk (*) have been converted as per your preference. These are not the official measures. To view the measures specified by the manufacturer, click here.
IMPORTANT INFORMATION
- IMPORTANT: The minimum door width with soft-close mechanism is 27 1/2 in (700 mm).
- Use metric dimensions for greater accuracy during installation.
- Please make sure to read the entirety of the installation manual before proceeding with the installation.
- Wear safety gear such as gloves, safety glasses, safety shoes, and ear protection.
- Every fastener used to attach the track to the wall must be fastened securely into a structural surface.
- Always remove debris/dust/residues (sawdust and/or aluminum) from all tracks and guide channels using a dry cloth during installation and before operating the system.
- Never spray lubricant on this product.
- Do not exceed stated limitations and parameters. This will cause early wear and performance failure.
- Use metric dimensions for greater accuracy during installation.
- Please make sure to read the entirety of the installation manual before proceeding with the installation.
- Wear safety gear such as gloves, safety glasses, safety shoes, and ear protection.
- Every fastener used to attach the track to the wall must be fastened securely into a structural surface.
- Always remove debris/dust/residues (sawdust and/or aluminum) from all tracks and guide channels using a dry cloth during installation and before operating the system.
- Never spray lubricant on this product.
- Do not exceed stated limitations and parameters. This will cause early wear and performance failure.
DISCLAIMER
Pictures provided for visual reference only: actual product may vary.
- All required hardware should be ordered and obtained prior to initiating fabrication or installation work. Please verify that the parts and quantities listed in your order are correct before proceeding to checkout.
- Always use instructions provided by the manufacturer, as included with the product. Manufacturer reserves the right to amend, modify, or otherwise supplement any previously issued product and/or technical information, as deemed required from time to time, without prior notice.
- The documentation, drawings, and instructions on this page apply to the system described on this page only. Richelieu expressly declines all responsibility for any design or construction that combines this system with systems from this same manufacturer or systems from other manufacturers.
- Installation of the product shall be executed by qualified individuals only, always ensuring that each product is securely installed using proper fixation methods, as appropriate for each applicable substratum. We trust that anyone installing these products has the required skills, knowledge, and experience. Richelieu expressly disclaims any liabilities for results obtained through improper use or installation.
- All required hardware should be ordered and obtained prior to initiating fabrication or installation work. Please verify that the parts and quantities listed in your order are correct before proceeding to checkout.
- Always use instructions provided by the manufacturer, as included with the product. Manufacturer reserves the right to amend, modify, or otherwise supplement any previously issued product and/or technical information, as deemed required from time to time, without prior notice.
- The documentation, drawings, and instructions on this page apply to the system described on this page only. Richelieu expressly declines all responsibility for any design or construction that combines this system with systems from this same manufacturer or systems from other manufacturers.
- Installation of the product shall be executed by qualified individuals only, always ensuring that each product is securely installed using proper fixation methods, as appropriate for each applicable substratum. We trust that anyone installing these products has the required skills, knowledge, and experience. Richelieu expressly disclaims any liabilities for results obtained through improper use or installation.
