Instructions
HAWA PORTA 100 HM Hardware Set
Product # 893133071
Box
Concealed hardware
The HAWA PORTA 100 HM Hardware Set is designed for a single sliding wood door with a weight capacity of up to 220 lb (100 kg).
Features:
- Concealed rebate mount suspension plate
- Track stoppers with adjustable retaining device
- Floor mounted guide wheel
- Optional soft-close mechanisms available for doors 133 lb (61 kg) to 220 lb (100 kg), sold separately
- Simple and flexible installation
- Smooth operation
IMPORTANT: Use metric dimensions for greater accuracy during installation. Cut a groove 1/2 in (12 mm) x 5/8 in (16 mm) at the bottom of the door for bottom guide.
Features:
- Concealed rebate mount suspension plate
- Track stoppers with adjustable retaining device
- Floor mounted guide wheel
- Optional soft-close mechanisms available for doors 133 lb (61 kg) to 220 lb (100 kg), sold separately
- Simple and flexible installation
- Smooth operation
IMPORTANT: Use metric dimensions for greater accuracy during installation. Cut a groove 1/2 in (12 mm) x 5/8 in (16 mm) at the bottom of the door for bottom guide.
TECHNICAL SPECIFICATIONS
Product #
893133071
Detailed Door Movement
Single sliding
Door Position
Full Overlay
Roller Position
Upper
Door Installation
Top Hung
Stopper
Two
Depth
29/32 in*
Adjustable
Yes
Load Capacity
88.2 to 220 lb*
Drilling Depth
23/32 in*
Product type
Hardware Set
Door Material
Wood
Number of Doors
1
Door Width
23 5/8 to 63 in*
Door Thickness
1 9/16 in*
Door Height
39 3/8 to 106 in*
Brand
Hawa
Disclaimer
Measures shown with an asterisk (*) have been converted as per your preference. These are not the official measures. To view the measures specified by the manufacturer, click here.
IMPORTANT INFORMATION
IMPORTANT: Use metric dimensions for greater accuracy during installation.
- Cut a groove 1/2 in (12 mm) x 5/8 in (16 mm) at the bottom of the door for bottom guide.
- Please make sure to read the entirety of the installation manual before proceeding with the installation.
- Wear safety gear such as gloves, safety glasses, safety shoes, and ear protection.
- Every fastener used to attach the track to the wall must be fastened securely into a structural surface.
- Always remove debris/dust/residues (sawdust and/or aluminum) from all tracks and guide channels using a dry cloth during installation and before operating the system.
- Never spray lubricant on this product.
- Do not exceed stated limitations and parameters. This will cause early wear and performance failure, and will void the warranty.
- Cut a groove 1/2 in (12 mm) x 5/8 in (16 mm) at the bottom of the door for bottom guide.
- Please make sure to read the entirety of the installation manual before proceeding with the installation.
- Wear safety gear such as gloves, safety glasses, safety shoes, and ear protection.
- Every fastener used to attach the track to the wall must be fastened securely into a structural surface.
- Always remove debris/dust/residues (sawdust and/or aluminum) from all tracks and guide channels using a dry cloth during installation and before operating the system.
- Never spray lubricant on this product.
- Do not exceed stated limitations and parameters. This will cause early wear and performance failure, and will void the warranty.
INCLUDED PRODUCT(S)
- 2 upper wheels with suspension bolts
- 2 plastic suspension holders
- 2 steel housings for suspension holder
- 2 stops
- 1 floor guide
- Screws and fasteners for individual components only
- 2 plastic suspension holders
- 2 steel housings for suspension holder
- 2 stops
- 1 floor guide
- Screws and fasteners for individual components only
DISCLAIMER
Pictures provided for visual reference only: actual product may vary.
- All required hardware should be ordered and obtained prior to initiating fabrication or installation work. Please verify that the parts and quantities listed in your order are correct before proceeding to checkout.
- Always use instructions provided by the manufacturer, as included with the product. Manufacturer reserves the right to amend, modify, or otherwise supplement any previously issued product and/or technical information, as deemed required from time to time, without prior notice.
- The documentation, drawings, and instructions on this page apply to the system described on this page only. Richelieu expressly declines all responsibility for any design or construction that combines this system with systems from this same manufacturer or systems from other manufacturers.
- Installation of the product shall be executed by qualified individuals only, always ensuring that each product is securely installed using proper fixation methods, as appropriate for each applicable substratum. We trust that anyone installing these products has the required skills, knowledge, and experience. Richelieu expressly disclaims any liabilities for results obtained through improper use or installation.
- All required hardware should be ordered and obtained prior to initiating fabrication or installation work. Please verify that the parts and quantities listed in your order are correct before proceeding to checkout.
- Always use instructions provided by the manufacturer, as included with the product. Manufacturer reserves the right to amend, modify, or otherwise supplement any previously issued product and/or technical information, as deemed required from time to time, without prior notice.
- The documentation, drawings, and instructions on this page apply to the system described on this page only. Richelieu expressly declines all responsibility for any design or construction that combines this system with systems from this same manufacturer or systems from other manufacturers.
- Installation of the product shall be executed by qualified individuals only, always ensuring that each product is securely installed using proper fixation methods, as appropriate for each applicable substratum. We trust that anyone installing these products has the required skills, knowledge, and experience. Richelieu expressly disclaims any liabilities for results obtained through improper use or installation.
