NK-85 RETRAC

Minimal space between track and door

Kit for wooden sliding doors.

- Built with premium-quality quiet ball bearings.
- Anti-friction ball-bearing quiet rollers (SLID-Friction).
- With Retrac fittings for installation between panels or with both faces showing, with minimum 3 mm separation between fitting and panel.
- Rail pre-drilled every 25 cm.

Product number Track Mounting
On Ceiling Surface
Wall Front Using Brackets

REQUIRED PRODUCTS

Requires ONE of the following products

Top Track Product no. 8012005
  • Rail Length: 9 ft 10 in*
Length of 3 linear meter
OR
Top Track Product no. 8012010
  • Rail Length: 78 3/4 in*
Length of 2 linear meter

TECHNICAL SPECIFICATIONS

Product number WEBKIT1000161
Program R-Space
Function Standard Sliding
Type of Door Wood
Weight Capacity per Door 132 to 187 lb*
Number of Doors 1
Door Mounting Method Concealed
Roller Type Premium Ball Bearing
Roller Position Upper
Door Position In Front of Wall
Door Thickness 31/32 in*
Rail Length 78 3/4 to 118 in*
Rail Material Aluminum
Rail Finish Mill Finish
Brand Klein
Disclaimer

Measures shown with an asterisk (*) have been converted as per your preference. These are not the official measures. To view the measures specified by the manufacturer, click here.

SUGGESTED PRODUCTS

  • Recessed and Flush Cup Pulls for Sliding Doors
  • Mortice Locks, Latches and Striker Plates for Sliding Doors

RELATED DOCUMENTS

ADVANTAGES AND BENEFITS

- Fastenings close door at an approximate distance of 3 mm (1/8") from the track, ensuring minimum space between track and door.

INCLUDED PRODUCT(S)

- 2 double roller carriers
- 2 mounting brackets for standard installation
- 2 adjustment screws
- 2 stops
- Assembly screws
- 1 central guide

IMPORTANT INFORMATION

Picture for visual reference only: actual product may vary from that shown in photo.
Be sure to order hardware before beginning fabrication or installation work.
Always use the instructions inside the packaging provided by the manufacturer, as the manufacturer reserves the right to make technical changes or modify information without prior notice.
All technical drawings and documents contain examples for the assembly of different suppliers' hardware. The customer cannot make any claims based on the use of these documents. No responsibility is assumed for design details relating to a construction or project.
At all times, execution and installation must be undertaken by qualified persons.
Never exceed the maximum weight or the maximum dimensions recommended by the manufacturer.
Always be sure to install the product correctly using the appropriate fixation for your material.
Use a dry cloth to remove fragments, dust, and residue (wood and/or aluminum sawdust) from rails before the installation of the hangers.
Never use any spray lubricant on these products.

DISCLAIMER

The preceding information as well as any technical recommendations given in writing, verbally or based on tests are provided to the best of our knowledge. However, they are non-binding recommendations only and do not affect your responsibility to determine the correctness of given recommendations and suitability of the product for your particular purposes. The application, use or processing of our products as well as the production of products based on our technical recommendations are beyond our control and therefore fall exclusively in your area of responsibility. Sales of our products are subject to our most recent General Sales and Delivery Conditions. Please note that Richelieu will not accept any returns or claims for unpackaged products.
NK-85 RETRAC

Product number: WEBKIT1000161