Line art
Black Diamond - Decorative Visible Rail System
Product # 246081MATPVC
Interior Barn Door
The Black Diamond Barn Door Kit is a wall mount sliding door system with visible black flat bar mount for a single wood door weighing up to 220 lb (100 kg).
Features:
- Kit format includes hardware set for one door and track set 78 in (2 m) long
- Matte black
- Diamond shape surface direct mount flat bar with quick installation
- Two-part floor guide that does not require a groove
- Available soft-close mechanism (sold separately) for doors weighing up to 176 lb (80 kg) each
- For biparting application, the position of the upper trolleys will need to be shifted
The Black Diamond is an ideal solution for residential applications.
IMPORTANT: The minimum door width is 36 in (914 mm) when using a soft-close mechanism, and the maximum door weight is 176 lb (80 kg).
Features:
- Kit format includes hardware set for one door and track set 78 in (2 m) long
- Matte black
- Diamond shape surface direct mount flat bar with quick installation
- Two-part floor guide that does not require a groove
- Available soft-close mechanism (sold separately) for doors weighing up to 176 lb (80 kg) each
- For biparting application, the position of the upper trolleys will need to be shifted
The Black Diamond is an ideal solution for residential applications.
IMPORTANT: The minimum door width is 36 in (914 mm) when using a soft-close mechanism, and the maximum door weight is 176 lb (80 kg).
ADVANTAGES AND BENEFITS
Ball-bearing rollers for smooth and quiet operation.
Rails are pre-drilled at every 450 mm for the installation of 5 wall-mount brackets and at each end to allow for interconnection with other rails or the installation of soft-close mechanism.
Security: each roller unit is equipped with a device that prevents derailment during rough use of the door.
Rails are pre-drilled at every 450 mm for the installation of 5 wall-mount brackets and at each end to allow for interconnection with other rails or the installation of soft-close mechanism.
Security: each roller unit is equipped with a device that prevents derailment during rough use of the door.
TECHNICAL SPECIFICATIONS
Product #
246081MATPVC
Door Material
Wood
Track Mounting
Wall Mount
Load Capacity
33.1 to 220 lb*
Door Position
In Front of Wall
Door Thickness
1 3/8 to 1 3/4 in
Roller Type
Ball Bearing
Roller Position
Upper
Application
Closet and Walk-In Closet, Standard Access Door, Barn Door
Screw/Nail Included
Yes
Overall Length
78 3/4 in*
Track type
Flat Bar
Manufacturing Material
Steel
Finish
Black
Soft-Closing
No
Product type
Complete Set
Style
Rustic
Groove Depth
25/32 in*
Groove Needed for Guiding System
No
Number of Doors
1
Door Width
24 to 40 in
Groove Width at the Bottom of Door
9/32 in*
Disclaimer
Measures shown with an asterisk (*) have been converted as per your preference. These are not the official measures. To view the measures specified by the manufacturer, click here.
SUGGESTED PRODUCTS
- Handles for Sliding Barn Doors
- Door Guides for Sliding Door Systems
- Recessed and Flush Cup Pulls for Sliding Doors
- Mounting Accessories
- Stoppers and Soft-Close Mechanisms
INCLUDED PRODUCT(S)
1 two-meter rail (flat bar)
2 single roller supports for 1-3/8" or 1-3/4" door
2 end-bumpers
5 wall-mount brackets
2 anti-derailment pieces
1 door bottom guide
Screws are included
2 single roller supports for 1-3/8" or 1-3/4" door
2 end-bumpers
5 wall-mount brackets
2 anti-derailment pieces
1 door bottom guide
Screws are included
IMPORTANT INFORMATION
Door handles and door not included.
It is recommended to use a solid or glass door in order to obtain the minimum weight to reduce noise resonance. Use a wider door than the opening to avoid angled views and preserve privacy. For example, it is recommended to use a door 34" wide for an opening of 30". The bottom of the door requires a groove for the concealed guiding system.
IMPORTANT: The minimum door width is 36 in (914 mm) when using a soft-close mechanism, and the maximum door weight is 176 lb (80 kg).
Preparation: Remove the frame moldings or install a piece of wood (not included) of the same thickness and length before setting the new hardware in place to ensure there is enough clearance for the door. Always make sure that the product is properly attached or installed using appropriate fixings material. An additional anchor may be required for installation (sold separately).
- Pictures provided for visual reference only: actual product may vary.
- All required hardware should be ordered and obtained prior to initiating fabrication or installation work. Please verify that the parts and quantities listed in your order are correct before proceeding to checkout.
- Always use instructions provided by the manufacturer, as included with the product. Manufacturer reserves the right to amend, modify, or otherwise supplement any previously issued product and/or technical information, as deemed required from time to time, without prior notice.
- The documentation, drawings, and instructions on this page apply to the system described on this page only. Richelieu expressly declines all responsibility for any design or construction that combines this system with systems from this same manufacturer or systems from other manufacturers.
- Installation of the product shall be executed by qualified individuals only, always ensuring that each product is securely installed using proper fixation methods, as appropriate for each applicable substratum. We trust that anyone installing these products has the required skills, knowledge, and experience. Richelieu expressly disclaims any liabilities for results obtained through improper use or installation.
- Always remove debris/dust/residues (sawdust and/or aluminum) from all tracks and guide channels using a dry cloth during installation and before operating the system.
- Never spray lubricant.
It is recommended to use a solid or glass door in order to obtain the minimum weight to reduce noise resonance. Use a wider door than the opening to avoid angled views and preserve privacy. For example, it is recommended to use a door 34" wide for an opening of 30". The bottom of the door requires a groove for the concealed guiding system.
IMPORTANT: The minimum door width is 36 in (914 mm) when using a soft-close mechanism, and the maximum door weight is 176 lb (80 kg).
Preparation: Remove the frame moldings or install a piece of wood (not included) of the same thickness and length before setting the new hardware in place to ensure there is enough clearance for the door. Always make sure that the product is properly attached or installed using appropriate fixings material. An additional anchor may be required for installation (sold separately).
- Pictures provided for visual reference only: actual product may vary.
- All required hardware should be ordered and obtained prior to initiating fabrication or installation work. Please verify that the parts and quantities listed in your order are correct before proceeding to checkout.
- Always use instructions provided by the manufacturer, as included with the product. Manufacturer reserves the right to amend, modify, or otherwise supplement any previously issued product and/or technical information, as deemed required from time to time, without prior notice.
- The documentation, drawings, and instructions on this page apply to the system described on this page only. Richelieu expressly declines all responsibility for any design or construction that combines this system with systems from this same manufacturer or systems from other manufacturers.
- Installation of the product shall be executed by qualified individuals only, always ensuring that each product is securely installed using proper fixation methods, as appropriate for each applicable substratum. We trust that anyone installing these products has the required skills, knowledge, and experience. Richelieu expressly disclaims any liabilities for results obtained through improper use or installation.
- Always remove debris/dust/residues (sawdust and/or aluminum) from all tracks and guide channels using a dry cloth during installation and before operating the system.
- Never spray lubricant.
DISCLAIMER
By accessing or referring to this document, or by using any of Richelieu's websites, you accept all applicable terms as they apply from time to time. This legal disclaimer is in no way limited or altered by any other terms or conditions. Richelieu may change said terms at its discretion and without prior notice. A version of the most current terms will always be available on Richelieu's website.
The preceding information and technical documentation, information, or recommendations issued by Richelieu verbally or in writing is believed to be accurate and is given in good faith, but no representation of warranty as to its completeness or accuracy is made. Suggestions for use or application are only opinions. Users are responsible for determining the suitability of these products for their own particular purpose. No representation of warranty, expressed or implied, is made with respect to information or products including, without limitation, warranties or merchantability, fitness for particular purpose, non-infringement of any third party patent or other intellectual property rights including, without limit, copyright, trademark, and designs. Any trademarks identified herein are trademarks of the Richelieu group of companies.
Richelieu assumes no risk and shall not be subject to any liability for damages or loss resulting from the specific use or application made of the product. Richelieu's liability for any claim, whether based on breach of contract, negligence, or infringement of any rights of any party relating to the product shall not exceed the price paid for said products. In no event shall Richelieu be liable for any special, incidental, or consequential damages (including loss of use, loss of profit, and claims of third parties) however caused, whether by the negligence of Richelieu or otherwise.
Products returned for warranty purposes shall be subject to Richelieu's then applicable Return Policy.
The preceding information and technical documentation, information, or recommendations issued by Richelieu verbally or in writing is believed to be accurate and is given in good faith, but no representation of warranty as to its completeness or accuracy is made. Suggestions for use or application are only opinions. Users are responsible for determining the suitability of these products for their own particular purpose. No representation of warranty, expressed or implied, is made with respect to information or products including, without limitation, warranties or merchantability, fitness for particular purpose, non-infringement of any third party patent or other intellectual property rights including, without limit, copyright, trademark, and designs. Any trademarks identified herein are trademarks of the Richelieu group of companies.
Richelieu assumes no risk and shall not be subject to any liability for damages or loss resulting from the specific use or application made of the product. Richelieu's liability for any claim, whether based on breach of contract, negligence, or infringement of any rights of any party relating to the product shall not exceed the price paid for said products. In no event shall Richelieu be liable for any special, incidental, or consequential damages (including loss of use, loss of profit, and claims of third parties) however caused, whether by the negligence of Richelieu or otherwise.
Products returned for warranty purposes shall be subject to Richelieu's then applicable Return Policy.
