Product number Track MountingDoor PositionDesign IntentDisplayed in These Showrooms
On Ceiling SurfaceInside FrameStorage / Screen PanelMontreal / Ottawa / Toronto / Mississauga
Wall Front Using BracketsIn Front of WallCloset & Walk-In Closet / Screen Panel 
Recessed - Inside CeilingInside FrameScreen Panel 

INCLUDED IN THIS WEBKIT

Quantity
Box
 

REQUIRED PRODUCTS

Requires ONE of the following products

Quantity
Length of 2 linear meter
OR
Length of 3 linear meter

TECHNICAL SPECIFICATIONS

Product number WEBKIT1000156
Type of Door Wood
Door Thickness 1 3/8 in*
Weight Capacity per Door 198 to 287 lb*
Rail Length 78 3/4 to 118 in*
Door Mounting Method Concealed
Roller Type Premium Ball Bearing
Number of Doors 1
Rail Material Anodized Aluminum
Rail Finish Satin Aluminum
Milling Depth 1 1/4 in*
Roller Position Upper
Operation Single Sliding
Disclaimer

Measures shown with an asterisk (*) have been converted as per your preference. These are not the official measures. To view the measures specified by the manufacturer, click here.

RELATED DOCUMENTS

ADVANTAGES AND BENEFITS

- Installs easily with a clean, innovative design
- Ball-bearing system for smooth motion

INCLUDED PRODUCT(S)

- Screws
- Bumper stop
- Floor guide
- Dual roller carrier

IMPORTANT INFORMATION

Note:
Picture for visual reference only: actual product may vary from that shown in photo.
Be sure to order hardware before beginning fabrication or installation work.
Always use the instructions inside the packaging provided by the manufacturer, as the manufacturer reserves the right to make technical changes or modify information without prior notice.
All technical drawings and documents contain examples for the assembly of different suppliers' hardware. The customer cannot make any claims based on the use of these documents. No responsibility is assumed for design details relating to a construction or project.
At all times, execution and installation must be undertaken by qualified persons.
Never exceed the maximum weight or the maximum dimensions recommended by the manufacturer.
Always be sure to install the product correctly using the appropriate fixation for your material.
Use a dry cloth to remove fragments, dust, and residue (wood and/or aluminum sawdust) from rails before the installation of the hangers.
Never use any spray lubricant on these products.

DISCLAIMER

The preceding information as well as any technical recommendations given in writing, verbally or based on tests are provided to the best of our knowledge. However, they are non-binding recommendations only and do not affect your responsibility to determine the correctness of given recommendations and suitability of the product for your particular purposes. The application, use or processing of our products as well as the production of products based on our technical recommendations are beyond our control and therefore fall exclusively in your area of responsibility. Sales of our products are subject to our most recent General Sales and Delivery Conditions. Please note that Richelieu will not accept any returns or claims for unpackaged products.
SLID-130 RETRAC

Product number: WEBKIT1000156