Richelieu 2017 CCRM US
Harmony Panel - Bianco M001
Harmony panels are a high-quality product that provides a strong visual impact and stylish results. These panels are available in a wide range of colors with exactly the same hue, whether in an ultra-gloss or super-matte finish.
The exterior sides are covered with an 1.4 mm acrylic sheet and the 16 mm core panel is in "carb2" particle.
Measures shown with an asterisk (*) have been converted as per your preference. These are not the official measures. To view the measures specified by the manufacturer, click here.
- Harmony Samples
- Harmony Acrylic Sheets
- Harmony - ABS Edgebanding
- Harmony Doors
ONLY Bianco, Tortora, and Grigio colors in Super-Matte finish are available with Zerobact technology, which inhibits the growth of bacteria on surfaces, making it ideal for medical facilities, laboratories, bathrooms, schools, and day-care centers.
Certificat: JIS Z2801:2010.
Antibacterial agent embedded into the decorative acrylic, antibacterial on two sides.
- High resistance to heat: will not warp, even in proximity to heat sources (e.g., stoves).
- High resistance to abrasion, water, and stains.
- Resistant to UV rays and discoloration.
- Easy to clean.
- Leaves no visible fingerprints behind.
- Ultra-opaque surface.
- Chemical and stain resistant.
- Extremely resistant lacquered mirror effect.
- May be repolished.
The matching 1.4 mm sheets can be used for store, living room, kitchen or bathroom furnishings, thus providing tremendous flexibility.
For normal cleaning, all glossy parts should be wiped with a soft cloth dampened with water or a "NEUTRAL" de-greasing liquid, or an anti-static product.
Do not use: acetone, trichloroethylene (TCE), ammonia or steel scouring pads or abrasive creams that could scratch the surface.
Only remove the protective film once the product has been fully installed or processed, taking care not to allow any fingernails or sharp and abrasive objects to come into contact with the surface until cured. See curing instructions below.
As soon as the protective film has been removed the product is still very sensitive to scratching. To harden and improve resistance, the surface should be wiped with a soft cloth and an anti-static product (e.g. "Pledge multi-surface anti-static spray" or an equivalent). Allow the product to settle for at least 24 HOURS.