Certificates
Sorry, this product is not available in your region. To find similar products available in your region, click here.
Harmony Panel - Grigio Metallic M025
Product # KM025MET18849
Sheet
Harmony panels are a high-quality product that provides a strong visual impact and stylish results. These panels are available in a wide range of colors with exactly the same hue, whether in an ultra-gloss or super-matte finish.
The exterior sides are covered with an 1.4 mm acrylic sheet and the 16 mm core panel is in "carb2" particle.
The exterior sides are covered with an 1.4 mm acrylic sheet and the 16 mm core panel is in "carb2" particle.
ADVANTAGES AND BENEFITS
- High resistance to heat: will not warp, even in proximity to heat sources (e.g., stoves)
- High resistance to abrasion, water, and stains.
- Resistant to UV rays and discoloration.
- Easy to clean.
Ultra-gloss finish
- Extremely resistant lacquered mirror effect.
- May be repolished.
Super-matte finish
- Leaves no visible fingerprints behind.
- Ultra-opaque surface.
- Chemical and stain resistant.
- High resistance to abrasion, water, and stains.
- Resistant to UV rays and discoloration.
- Easy to clean.
Ultra-gloss finish
- Extremely resistant lacquered mirror effect.
- May be repolished.
Super-matte finish
- Leaves no visible fingerprints behind.
- Ultra-opaque surface.
- Chemical and stain resistant.
TECHNICAL SPECIFICATIONS
Product #
KM025MET18849
Finish
Metallic
Material
Acrylic
Length
110 in
Width
51 in
Thickness
3/4 in*
Collection
Acrylic
Color Group
Taupe/Brown
Color Name
Grigio Metallic
Panel Core
Particle CARB II
Antibacterial Surface
No
Product available in Cabinet Doors
Yes
Product Specialization
Vertical Interior Surface, Furniture Making, Cabinetry
Color Number
M025
Disclaimer
Measures shown with an asterisk (*) have been converted as per your preference. These are not the official measures. To view the measures specified by the manufacturer, click here.
APPLICATION
Highly scratch resistant, the Harmony series with its 18.8 mm "carb2" particle panels are particularly suitable to furniture making and cabinetry.
Maintenance:
For normal cleaning, all glossy parts should be wiped with a soft cloth dampened with water or a "NEUTRAL" degreasing liquid, or an antistatic product.
Do not use: acetone, trichloroethylene (TCE), ammonia or steel scouring pads or abrasive creams that could scratch the surface.
Maintenance:
For normal cleaning, all glossy parts should be wiped with a soft cloth dampened with water or a "NEUTRAL" degreasing liquid, or an antistatic product.
Do not use: acetone, trichloroethylene (TCE), ammonia or steel scouring pads or abrasive creams that could scratch the surface.
IMPORTANT INFORMATION
!!! Harmony panels with metallic finish are directional. They must be installed in the same direction. Arrows indicate the direction on the protective film !!!
The surface of each individual item is covered with a protective film and has a multilingual use and maintenance label.
Only remove the protective film once the product has been fully installed or processed, taking care not to allow any fingernails or sharp and abrasive objects to come into contact with the surface until cured. See curing instructions below.
As soon as the protective film has been removed the product is still very sensitive to scratching. To harden and improve resistance, the surface should be wiped with a soft cloth and an anti-static product (e.g., "Pledge multi-surface anti-static spray" or equivalent). Allow the product to settle for at least 24 HOURS.
The surface of each individual item is covered with a protective film and has a multilingual use and maintenance label.
Only remove the protective film once the product has been fully installed or processed, taking care not to allow any fingernails or sharp and abrasive objects to come into contact with the surface until cured. See curing instructions below.
As soon as the protective film has been removed the product is still very sensitive to scratching. To harden and improve resistance, the surface should be wiped with a soft cloth and an anti-static product (e.g., "Pledge multi-surface anti-static spray" or equivalent). Allow the product to settle for at least 24 HOURS.
