Jowat 930.94 Flushing Agent for PUR Edgebanders

To buy, choose from the options below.
Weight: 5.44 kg* 9.07 kg* Features: Cartridge Format Slug Format Select Options
Product № Weight Features
93094-0012HG 5.44 kg* Cartridge Format
93094-0003AG 9.07 kg* Slug Format


For flushing out applicator units for PUR hot melts after extended down times or during complete standstill.


VOC Concentration (EPA Method 24)
0 g/l
Product Density
7.89 lb/gal
Production Time
See Production Delay at Checkout

Measures shown with an asterisk (*) have been converted as per your preference. These are not the official measures. To view the measures specified by the manufacturer, click here.


Due to a special additive, the chemical reaction of the PUR hot melt adhesive is prevented during the flushing procedure. Allow all adhesive to be extruded completely. Then fill the unit with the Jowat flushing agent and melt. The entire amount of flushing agent has to run through the hose and nozzle; then repeat the procedure to ensure that all hot melt residues have been removed. Before taking up work again, the flushing agent has to be completely removed from the equipment. If this is not done, it may be possible that the desired crosslinking reaction will not take place when reactive PUR hot melt adhesives are processed.
Jowat 930.94 Flushing Agent for PUR Edgebanders

To buy, choose from the options.