Technical Datasheet
Sorry, this product is not available in your region. To find similar products available in your region, click here.
Cordless Drill QUADRIVE 4,0 with batteries
Product # FS576778
TPC 18/4 HPC 4,0 I-Set
- The large number of attachments, combined with perfectly matched accessories, make the QUADRIVE an unrivalled hammer drill for a wide range of possible uses.
- Whether you are working on wood, metal or masonry -- thanks to the axial hammer feature that can be switched on.
- The TPC is extremely durable and, thanks to its brushless EC-TEC motor, has extreme resilience and endurance.
- Whether you are working on wood, metal or masonry -- thanks to the axial hammer feature that can be switched on.
- The TPC is extremely durable and, thanks to its brushless EC-TEC motor, has extreme resilience and endurance.
ADVANTAGES AND BENEFITS
- Maximum performance: Thanks to the extremely powerful, brushless, and therefore long-lasting, EC-TEC motor
- Robust: Resilient four-speed metal gearbox, also fully covered by the comprehensive support provided by Festool Service
- For an even wider range of applications: Hammer function that can be activated for drilling into masonry
- The QUADRIVE with four gears for every working situation: From screwdriving with 442.5 in-lbs (50 Nm) torque in first gear to precise drilling at 3600 rpm in fourth gear
- Robust: Resilient four-speed metal gearbox, also fully covered by the comprehensive support provided by Festool Service
- For an even wider range of applications: Hammer function that can be activated for drilling into masonry
- The QUADRIVE with four gears for every working situation: From screwdriving with 442.5 in-lbs (50 Nm) torque in first gear to precise drilling at 3600 rpm in fourth gear
TECHNICAL SPECIFICATIONS
Product #
FS576778
Voltage Type
18V
Chuck
1/16" - 1/2"
Brand
Festool
Type of Tool
Cordless
INCLUDED PRODUCT(S)
- 2x BP 18 Li 4,0 HPC-ASI battery pack
- Rapid charger TCL 6
- Additional side-mounted grip
- Belt clip
- Bit PZ2
- CENTROTEC BH 60 CE Imp magnetic bit holder
- CENTROTEC Chuck
- FastFix keyless chuck 1/2" (13mm)
- FastFix Right Angle Chuck
- Systainer SYS3 M 187
- Rapid charger TCL 6
- Additional side-mounted grip
- Belt clip
- Bit PZ2
- CENTROTEC BH 60 CE Imp magnetic bit holder
- CENTROTEC Chuck
- FastFix keyless chuck 1/2" (13mm)
- FastFix Right Angle Chuck
- Systainer SYS3 M 187
APPLICATION
- Production of wooden substructures, frame structures
- Installation of doors and windows
- Drilling and screwdriving in wood, metal and plastic
- Drive screws into wood up to 3/8" x 11-13/16" (10x300 mm)
- Drilling in wood up to 2-3/4" (70 mm) with Forstner drill bits
- Drilling with hammer-mode in brickwork or masonry
- Installation of doors and windows
- Drilling and screwdriving in wood, metal and plastic
- Drive screws into wood up to 3/8" x 11-13/16" (10x300 mm)
- Drilling in wood up to 2-3/4" (70 mm) with Forstner drill bits
- Drilling with hammer-mode in brickwork or masonry
IMPORTANT INFORMATION
Technical Data
- Drilling diameter in brickwork : 3/8" (10 mm)
- Chuck range : 1/16" - 1/2" (1.5 - 13 mm)
- Torque adjustment 1st/2nd gear : 17.7 in-lb - 177 in-lb (2 - 20 Nm) / 17.7 in-lb - 177 in-lb (2 - 20 Nm)
- Drilling diameter, wood/steel : 2-3/4" (70 mm) / 1/2" (13 mm)
- Battery voltage : 18 V
- Weight with battery : 4.18 lbs (1,9)
- Max. torque, wood/steel : 442.5 in-lb / 663.8 in-lb (50/75 Nm)
- Drilling diameter in brickwork : 3/8" (10 mm)
- Chuck range : 1/16" - 1/2" (1.5 - 13 mm)
- Torque adjustment 1st/2nd gear : 17.7 in-lb - 177 in-lb (2 - 20 Nm) / 17.7 in-lb - 177 in-lb (2 - 20 Nm)
- Drilling diameter, wood/steel : 2-3/4" (70 mm) / 1/2" (13 mm)
- Battery voltage : 18 V
- Weight with battery : 4.18 lbs (1,9)
- Max. torque, wood/steel : 442.5 in-lb / 663.8 in-lb (50/75 Nm)
