Warranty
Richelieu Portable Edgebander
Product # MAK03026
The Portable Edgebander is designed for convenience, portability, and affordability. It features a hot melt glue applicator for use on PVC, ABS, paper, and wood veneer edgebanding that is not pre-glued.
ADVANTAGES AND BENEFITS
- Easy and fast setup
- Precise cutting of the tape with integrated manual cutter
- Tape support for the tape roll
- Inner guide to help align the workpiece before the glue spindle
- Tape guide to ensure alignment of tape and workpiece
- Rubber spindle guides the tape onto the workpiece at a set speed
- Back rolls provide pressure points that help bond the glue and the edgebanding tape
- Table guide to help move the workpiece easily over the table
- Retractable legs make it portable
- Can fit in a standard car trunk for easy transportation
- Self centering plate that locks in tape.
- Variable speed controller
- 3mm guillotine cutter
- CA/UL rated with upgraded switches and electronics
- Precise cutting of the tape with integrated manual cutter
- Tape support for the tape roll
- Inner guide to help align the workpiece before the glue spindle
- Tape guide to ensure alignment of tape and workpiece
- Rubber spindle guides the tape onto the workpiece at a set speed
- Back rolls provide pressure points that help bond the glue and the edgebanding tape
- Table guide to help move the workpiece easily over the table
- Retractable legs make it portable
- Can fit in a standard car trunk for easy transportation
- Self centering plate that locks in tape.
- Variable speed controller
- 3mm guillotine cutter
- CA/UL rated with upgraded switches and electronics
TECHNICAL SPECIFICATIONS
Product #
MAK03026
Width
3 in
Weight
114 lb
Brand
Richelieu
Voltage
127 V
Power
1.3 W
SUGGESTED PRODUCTS
- Shop Supplies
- Hot Melt Glues
- Eye Protection
- Edgebanding Systems
- Hearing Protection
- Hand Protection
- Respiratory Protection
APPLICATION
A spiral glue bar raises the glue from the glue pot and flows back down, similar to a fondue fountain.
IMPORTANT INFORMATION
- Maximum edgebanding thickness of 1/8 in (3 mm) and maximum width of 3 in (76 mm)
- Required glue works in the range of 266° F to 356° F (130° C to 180° C)
- The glue pot has a capacity of 1.5 lb (680 g), comes with 1.5 lb (680 g) of glue, and heats in 15 minutes
Technical information:
- Tape thickness: 1/64 in to 5/16 in (0.3 mm to 2 mm)
- Max. tape width: 3 in (76 mm)
- Feeder speed: 18 ft (5486.4 mm)/min
- Power: 1300 Watts
- Motor: 24V
- Volts/amps: 110 V / 10 A
- Required glue works in the range of 266° F to 356° F (130° C to 180° C)
- The glue pot has a capacity of 1.5 lb (680 g), comes with 1.5 lb (680 g) of glue, and heats in 15 minutes
Technical information:
- Tape thickness: 1/64 in to 5/16 in (0.3 mm to 2 mm)
- Max. tape width: 3 in (76 mm)
- Feeder speed: 18 ft (5486.4 mm)/min
- Power: 1300 Watts
- Motor: 24V
- Volts/amps: 110 V / 10 A
