Edge Router MFK 700 EQ-Set

Product # FS576239
With its modular design and tool-less base changes, the MFK 700 can easily transform from a vertical to a horizontal position in a few simple steps.
Trim laminate and edge band or rout grooves for inlays easily with the light weight and maneuverable MFK 700. Packed with features, this trim router saves you money by allowing you to use bearing-less bits when used with the attachable base feeler bearing. 1/256" (1/10 mm) fine depth adjustments and exceptional dust extraction make this an ideal router for all of your light routing tasks.
Due to the nature of the horizontal base design, there is a limit to the bit size that can be used in this configuration.
Do not use a bit with a cutting length greater than 5/8" (16 mm) and a shank length of 1-13/16" (46 mm). For greatest range of adjustment, a 3/4" (19 mm) bit diameter is recommended.


Powerful 720 watt (6.0 amp) motor can easily tackle most trimming, profiling and routing applications with variable speed and detachable cord.
Vertical and horizontal extra-wide bases provide ample support area for maximum control especially near edges or on narrow stock.
Micro-adjustable depth control to 1/256 inch (1/10 mm) with dual locking columns for precise routing control.
Threaded insert to accept template guides and phenolic resin baseplate to easily glide on a surface without marring the material to be routed.


Product #
Type of Tool


Routing depth fine adjustment range: 1/2" (14 mm)
Max. cutter diameter: 1-1/4" (32 mm)
Dust extraction connection dia.: 1-1/16" (27 mm)
Weight: 4.41 lbs (1.9 kg)
Collet dia.: 1/4" - 5/16" (6 - 8 mm)
Power consumption: 720 watt


Recommended Festool bits - 491 666 and 491 670 for trimming of edge banding with horizontal base.



1.5 degree horizontal base unit for MFK Router
Collet wrench, WAF 19
5/16" (8mm) dia. clamping collet
Extraction hood
Systainer SYS3 M 187