Metric Tap, Die, and Drill Set - 26 Pieces
Product # 301370BLUE
- Titanium nitride coated for superior performance
- Manufactured to exacting specification from long-lasting tool steel
- A good range of sizes and thread types to meet the needs of most tradesmen, mechanics, and do-it-yourselfers
- Manufactured to exacting specification from long-lasting tool steel
- A good range of sizes and thread types to meet the needs of most tradesmen, mechanics, and do-it-yourselfers
TECHNICAL SPECIFICATIONS
Product #
301370BLUE
Packaging Specifications
Case
Brand
Mibro
Type of Tool
Accessory
IMPORTANT INFORMATION
Thread types:
- NC (USS) National Coarse: general-purpose threading used on appliances and machines
- NF (SAE) National Fine: used for automotive parts requiring extreme pressures
- NPT National Pipe Taper: for threading of pipes both internal and external
Tap and die sizing:
Taps and dies are sized with two numbers:
- The first number signifies the screw or bolt diameter
- The second, the number of threads per inch. A 3/4 in (19.05 mm)-10 die will cut 10 threads per inch on stock 3/4 in (19.05 mm) in outside diameter
- Sizes are clearly and permanently marked on each tap and die
- NC (USS) National Coarse: general-purpose threading used on appliances and machines
- NF (SAE) National Fine: used for automotive parts requiring extreme pressures
- NPT National Pipe Taper: for threading of pipes both internal and external
Tap and die sizing:
Taps and dies are sized with two numbers:
- The first number signifies the screw or bolt diameter
- The second, the number of threads per inch. A 3/4 in (19.05 mm)-10 die will cut 10 threads per inch on stock 3/4 in (19.05 mm) in outside diameter
- Sizes are clearly and permanently marked on each tap and die
INCLUDED PRODUCT(S)
- Dies: 3-0.50 mm, 4-0.70 mm, 5-0.80 mm, 5-0.90 mm, 6-1.00 mm, 7-1.00 mm, 8-1.25 mm, 10-1.50 mm
- Taps: 3-0.50 mm, 4-0.70 mm, 5-0.80 mm, 5-0.90 mm, 6-1.00 mm, 7-1.00 mm, 8-1.25 mm, 10-1.50 mm
- Titanium-coated drill bits: #40, 1/8 in (3.18 mm), #19, #20, 13/64 in (5.16 mm), 15/64 in (5.95 mm), 17/64 in (6.75 mm), 11/32 in (8.73 mm)
- Adjustable tap wrench: 1/8 in (3.18 mm) to 1/2 in (12.7 mm)
- Die holder: 1 in (25.4 mm) hex
- Taps: 3-0.50 mm, 4-0.70 mm, 5-0.80 mm, 5-0.90 mm, 6-1.00 mm, 7-1.00 mm, 8-1.25 mm, 10-1.50 mm
- Titanium-coated drill bits: #40, 1/8 in (3.18 mm), #19, #20, 13/64 in (5.16 mm), 15/64 in (5.95 mm), 17/64 in (6.75 mm), 11/32 in (8.73 mm)
- Adjustable tap wrench: 1/8 in (3.18 mm) to 1/2 in (12.7 mm)
- Die holder: 1 in (25.4 mm) hex
