Line art
Carbide Cutting Edge 6mm
Product # AT45185M
For cutting 3/4 in thick material in one pass
Up to 800 inches per minute!
Use a three-flute bit where fine finish is paramount. Three flutes balance the bit, eliminating vibration that degrades the cut finish. Three cuts per revolution yield a smooth surface and increased feed rates. 45185-M features a solid carbide cutting edge.
Excellent for nesting and grooving at an extremely fast feed rate which increases cost savings. The 6mm cutting diameter CNC nesting router bit with solid carbide cutting edges is brazed into a 12 mm steel shank. The unique design contributes to superb performance and excellent cutting results. Designed primarily for high speed CNC production.
Up to 800 IPM feed rate at 18,000 RPM cutting laminated particle board. Rate may change depending on material and CNC machine type.
Use a three-flute bit where fine finish is paramount. Three flutes balance the bit, eliminating vibration that degrades the cut finish. Three cuts per revolution yield a smooth surface and increased feed rates. 45185-M features a solid carbide cutting edge.
Excellent for nesting and grooving at an extremely fast feed rate which increases cost savings. The 6mm cutting diameter CNC nesting router bit with solid carbide cutting edges is brazed into a 12 mm steel shank. The unique design contributes to superb performance and excellent cutting results. Designed primarily for high speed CNC production.
Up to 800 IPM feed rate at 18,000 RPM cutting laminated particle board. Rate may change depending on material and CNC machine type.
ADVANTAGES AND BENEFITS
- 3 flutes for improved surface finish
- Only 6mm diameter equals minimal material waste
- Long lasting, fine micrograin extra hard carbide resulting in long tool life before re-sharpening
Excellent for Cutting:
- Laminated Particle Board, MDF & Melamine: Feed rate up to 800 IPM** at 18,000 RPM***
- Plywood: Feed rate up to 500 IPM** at 18,000 RPM***
- Only 6mm diameter equals minimal material waste
- Long lasting, fine micrograin extra hard carbide resulting in long tool life before re-sharpening
Excellent for Cutting:
- Laminated Particle Board, MDF & Melamine: Feed rate up to 800 IPM** at 18,000 RPM***
- Plywood: Feed rate up to 500 IPM** at 18,000 RPM***
TECHNICAL SPECIFICATIONS
Product #
AT45185M
Shank Diameter
15/32 in*
Drilling Diameter
1/4 in*
Overall Length
3 1/32 in*
Cutting Length
13/16 in*
Material
Carbide
Disclaimer
Measures shown with an asterisk (*) have been converted as per your preference. These are not the official measures. To view the measures specified by the manufacturer, click here.