CCRMUS18
Countersink for Wood Screw
Product # AT55200
Used to countersink holes for the heads of screws in woods, plastic, and non-ferrous materials. The 2-flute integral design ensures uniform and concentric results each and every time. Carbide tips provide chip free hole edges and last much longer than steel countersinks.
Replacement Drill Bit for AT55200: AT630002
Replacement Drill Bit for AT55202: AT630102
Replacement Drill Bit for AT55200: AT630002
Replacement Drill Bit for AT55202: AT630102
Product # | Drilling Diameter | Compatible Screws | Cutting Diameter (D) |
---|---|---|---|
AT55200 | 3/32 in | #4 | 11/32 in |
AT55202 | 1/8 in | #6 | 3/8 in |
TECHNICAL SPECIFICATIONS
Product #
AT55200
Shank Diameter
5/16 in
Brand
Amana
Length
1 5/8 in
Material
Carbide
APPLICATION
Excellent for Drilling:
Natural Woods
Man-Made Boards
MDF
Chipboard
Plywood
Aluminum/Non-Ferrous
Aluminum Composite Material (ACM)
Composites
Composite Decking Materials
Warning: When drilling aluminum/non-ferrous materials, for optimal results and extended tool life use lubricant or air cooling. Make sure the material is fixed and drill is stable during drilling.
Natural Woods
Man-Made Boards
MDF
Chipboard
Plywood
Aluminum/Non-Ferrous
Aluminum Composite Material (ACM)
Composites
Composite Decking Materials
Warning: When drilling aluminum/non-ferrous materials, for optimal results and extended tool life use lubricant or air cooling. Make sure the material is fixed and drill is stable during drilling.