Technical data sheet
A-Max Extended Life Straight Plunge Bit
Product # AT45414
Use a two-flute bit where fine finish is paramount. Two flutes balance the bit, eliminating vibration that degrades the cut finish. Two cuts per revolution yield a smooth surface, but feed rate is slightly reduced.
Product # | Cut Diameter | Overall Length | Shank Diameter | Material |
---|---|---|---|---|
AT45414 | 9.53 mm* | 70 mm* | 12.7 mm* | Carbide Tipped |
AT45190 | 1.59 mm* | 41.3 mm* | 6.35 mm* | Solid Carbide |
AT45200 | 3.18 mm* | 51 mm* | 6.35 mm* | Solid Carbide |
AT45201 | 3.97 mm* | 51 mm* | 6.35 mm* | Solid Carbide |
AT45202 | 4.76 mm* | 51 mm* | 6.35 mm* | Solid Carbide |
AT45208 | 6.35 mm* | 51 mm* | 6.35 mm* | Solid Carbide |
AT45210 | 6.35 mm* | 57 mm* | 6.35 mm* | Solid Carbide |
AT45218 | 9.53 mm* | 57 mm* | 6.35 mm* | Solid Carbide |
AT45226 | 12.7 mm* | 54 mm* | 6.35 mm* | Solid Carbide |
AT45420 | 12.7 mm* | 73 mm* | 12.7 mm* | Carbide Tipped |
AT45422 | 12.7 mm* | 79 mm* | 12.7 mm* | Carbide Tipped |
AT45228 | 15.9 mm* | 51 mm* | 6.35 mm* | Solid Carbide |
AT45445 | 18.3 mm* | 73 mm* | 12.7 mm* | Carbide Tipped |
AT45230 | 19.1 mm* | 51 mm* | 6.35 mm* | Solid Carbide |
AT45440 | 19.1 mm* | 73 mm* | 12.7 mm* | Carbide Tipped |
AT45448 | 25.4 mm* | 73 mm* | 12.7 mm* | Carbide Tipped |
ADVANTAGES AND BENEFITS
200% longer life time even when working with abrasive materials
Superior geometric design
Advanced grinding technology that improves the carbides' resistance to wear
Super clean cuts
Superior geometric design
Advanced grinding technology that improves the carbides' resistance to wear
Super clean cuts
TECHNICAL SPECIFICATIONS
Product #
AT45414
Application
Straight Plunge
Tool
CNC (Numerical Control), Router
Brand
Amana
Disclaimer
Measures shown with an asterisk (*) have been converted as per your preference. These are not the official measures. To view the measures specified by the manufacturer, click here.