Line art
No-File Bit
Product # AT47150
NOTE: AT47150 is for laminates 0.042-0.052" thick (1.5 mm radius); replacement bearing AT47704 (3/8" diameter).
NOTE: AT47154 is for laminates 0.025-0.038" thick (0.4 mm radius); replacement bearing AT47704 (3/8" diameter).
Eliminate the time-consuming hand-filing that normally follows each trimming cut on a laminate job. Our No-File bit "breaks" the sharp edge as it trims the laminate flush. When used properly, the resulting edge is smooth and has a slight radius.
NOTE: AT47154 is for laminates 0.025-0.038" thick (0.4 mm radius); replacement bearing AT47704 (3/8" diameter).
Eliminate the time-consuming hand-filing that normally follows each trimming cut on a laminate job. Our No-File bit "breaks" the sharp edge as it trims the laminate flush. When used properly, the resulting edge is smooth and has a slight radius.
ADVANTAGES AND BENEFITS
200% longer life time even when working with abrasive materials
Superior geometric design
Advanced grinding technology that improves the carbides' resistance to wear
Super clean cuts
Superior geometric design
Advanced grinding technology that improves the carbides' resistance to wear
Super clean cuts
