Technical data sheet
Ogee Stile & Rail Router Bit Sets for 3/4 to 1 Inch Material (2 pc)
Product # AT55430
The set includes two trim cutters for stock 7/8" through 1" in thickness. (trim cutters can be removed for making bearing-guided cuts on stock under 7/8" thick.)
Use in a table-mounted router. Guide straight cuts with the fence, setting it tangent to the trim cutters. Use the pilot bearing only for cuts on curved rails or stiles; for cuts on curved parts 7/8" to 1" thick, a template must to used.
Use in a table-mounted router. Guide straight cuts with the fence, setting it tangent to the trim cutters. Use the pilot bearing only for cuts on curved rails or stiles; for cuts on curved parts 7/8" to 1" thick, a template must to used.
TECHNICAL SPECIFICATIONS
Product #
AT55430
Application
Router Sets, Jointing and Planing
Tool
Router
Cut Diameter
41.3 mm*
Overall Length
84 mm*
Shank Diameter
12.7 mm*
Material
Carbide Tipped
Brand
Amana
Material Thickness (M)
19.1 to 25.4 mm*
Disclaimer
Measures shown with an asterisk (*) have been converted as per your preference. These are not the official measures. To view the measures specified by the manufacturer, click here.