Canadian Safety Datasheet
Spray Paint
Product # PTX10400
An excellent waterbased PU enamel with very fast drying characteristics producing high quality finishes (2.5 m² / 400 ml aerosol can).
For every 400 ml aerosol you can cover approximately 12 panels.
Instructions for use:
- Before use, shake well for one minute after hearing the sound of mixer.
- Apply over clean and dry surfaces.
- Apply in thin coats to achieve best results (three thin coats are better than one thick coat). Reapply after 30 minutes.
For every 400 ml aerosol you can cover approximately 12 panels.
Instructions for use:
- Before use, shake well for one minute after hearing the sound of mixer.
- Apply over clean and dry surfaces.
- Apply in thin coats to achieve best results (three thin coats are better than one thick coat). Reapply after 30 minutes.
ADVANTAGES AND BENEFITS
- Fast drying
- Excellent opacity
- Good durability of color
- Low VOC content and odor
- Easy to apply and recoat
- Excellent opacity
- Good durability of color
- Low VOC content and odor
- Easy to apply and recoat
IMPORTANT INFORMATION
- To prevent clogging after use, turn can upside down and depress the valve button for several seconds until only gas emerges.
- Use only in well ventilated areas and don`t spray on plugged-in equipment.
- Ask for material safety data sheets (MSDS).
- Use only in well ventilated areas and don`t spray on plugged-in equipment.
- Ask for material safety data sheets (MSDS).