Instructions
Gate Spring - 304
Product # 304SSR
An adjustable-tension spring that allows gates to close themselves. Sturdy and reliable. Easy to install.
| Product # | Finish | Material |
|---|---|---|
| 304SSR | Stainless Steel | Stainless Steel |
| 304FBR | Black | Steel |
| 304WR | White | Steel |
ADVANTAGES AND BENEFITS
Adjustable tension on spring allows gate to close itself.
IMPORTANT INFORMATION
The "STOP" plate must be installed so that the flat side of the adjustment bolt is always fully in contact with the "STOP" plate.
Make sure that the plate is centered to prevent the bolt from moving it to the left or right.
The spring inset must be between 1/4 in (6.35 mm) and 1 in (25.40 mm) to keep the "STOP" plate in place.
Make sure that the plate is centered to prevent the bolt from moving it to the left or right.
The spring inset must be between 1/4 in (6.35 mm) and 1 in (25.40 mm) to keep the "STOP" plate in place.
