Industrial Polyamide Rubber Caster

Product # F24804

Non-marking rubber tread

Industrial polyamide rubber caster. These heavy-duty casters are designed for use in the most demanding environments. Available with fixed plate, swivel, or double locking.
Total Height: 6 3/8 in* Fastening Type: Swivel with Double-Lock Brake Swivel Without Brake Swivel Without Brake Mounting Plate Dimensions: 3 11/32 in x 4 1/8 in (85 mm x 105 mm) Modify Options
Product # Total Height Fastening Type Mounting Plate Dimensions
F24804 6 3/8 in* Swivel with Double-Lock Brake 3 11/32 in x 4 1/8 in (85 mm x 105 mm)
F24806 6 11/32 in* Fixed 3 3/8 in x 4 3/32 in (85.5 mm x 104 mm)
F24805 6 3/8 in* Swivel Without Brake 3 11/32 in x 4 1/8 in (85 mm x 105 mm)

ADVANTAGES AND BENEFITS

- Non-marking rubber tread
- Low starting effort, rolls easily
- Double-lock braking system locks both the wheel and the swivel (F24804)
- Hight impact-resistant polyamide inner and outer rings; shock-absorbing central rubber ring

TECHNICAL SPECIFICATIONS

Product #
F24804
Load Capacity Per Caster
Max. 441 lb*
Wheel Diameter
4 29/32 in*
Tread Width
1 3/8 in*
Mounting Type
Plate
Material
Polyamide
Recommended Surfaces
Concrete, Carpet, Wood/Planking, Asphalt
Finish
Beige, Blue
Axle Diameter
5/16 in*
Axle Length
1 23/32 in*
Mounting Hole Diameter
11/32 in*
Conditions
Water, Solvents, Detergent, Extreme Cold, Extreme Heat, Petroleum Products
Disclaimer

Measures shown with an asterisk (*) have been converted as per your preference. These are not the official measures. To view the measures specified by the manufacturer, click here.

IMPORTANT INFORMATION

For all additional measurements, please see the technical documents.

DISCLAIMER

Technical data subject to change without prior notice.