Assembly instructions
Swivel Plate
To buy, choose from the options below.
| Product № | Features | Depth | Load Capacity | Width |
|---|---|---|---|---|
| 3312 | Without UPC Code | 76.2 mm* | 90.7 kg* | 76.2 mm* |
| 4412 | Without UPC Code | 10.2 cm* | 136 kg* | 10.2 cm* |
| 6612 | Without UPC Code | 15.2 cm* | 227 kg* | 15.2 cm* |
| UC3312 | With UPC Code | 76.2 mm* | 90.7 kg* | 76.2 mm* |
| UC4412 | With UPC Code | 10.2 cm* | 136 kg* | 10.2 cm* |
| UC6612 | With UPC Code | 15.2 cm* | 227 kg* | 15.2 cm* |
Description
Made of corrosion-resistant galvanized steel.
Swivel bearing design has a deeper race groove, encapsulating the balls more effectively and allowing them to move more smoothly.
TECHNICAL SPECIFICATIONS
Swivel
360 Degrees
Material
Steel
Finish
Zinc
Height
7.94 mm*
Disclaimer
Measures shown with an asterisk (*) have been converted as per your preference. These are not the official measures. To view the measures specified by the manufacturer, click here.
ADVANTAGES AND BENEFITS
Our swivel bearing design has a deeper race groove, encapsulating the balls more effectively and allowing them to move more smoothly.
IMPORTANT INFORMATION
Assembly instructions:
3" - 4" - 6" - 12" Sizes (Without Speed Nuts)
A. Use the smallest holes as a template to mark the turntable for blind fastening. Remove the bearing and then drill holes for self-tapping screws.
- For 3" - 4" - 6" sizes: drill 5/32" holes for #6 self-tapping screws.
- For 12" size: drill 3/16" holes for #8 screws.
- Avoid contamination from sawdust, paint or any other foreign material.
B. Lubricate the bearing balls with a small amount of heavy oil or grease. Mount the bearing on the selected center of the base using #6 wood screws.
C. Assemble turning section to the bearing. Make sure to select fasteners of the proper length to avoid interference with the opposite section.
3" - 4" - 6" - 12" Sizes (Without Speed Nuts)
A. Use the smallest holes as a template to mark the turntable for blind fastening. Remove the bearing and then drill holes for self-tapping screws.
- For 3" - 4" - 6" sizes: drill 5/32" holes for #6 self-tapping screws.
- For 12" size: drill 3/16" holes for #8 screws.
- Avoid contamination from sawdust, paint or any other foreign material.
B. Lubricate the bearing balls with a small amount of heavy oil or grease. Mount the bearing on the selected center of the base using #6 wood screws.
C. Assemble turning section to the bearing. Make sure to select fasteners of the proper length to avoid interference with the opposite section.
