North American SDS
Non-Flammable, High Strength Adhesive Spray - LIONGRIP R095NF
To add to cart, choose from the options below.
Non-Flammable
The Liongrip R095NF is a non flammable, LEED-compliant canister spray system. It has excellent spray pattern control and is designed to bond HPL and other decorative overlays to common core materials (particle board, MDF, OSB, etc.).
| Product # | Weight |
|---|---|
| R095NF35C | 35 lb |
| R095NF165C | 165 lb |
| R095NF330C | 330 lb |
ADVANTAGES AND BENEFITS
- Non-flammable canister system
- LEED compliant (IEQ Credits 4.1 & 4.4)
- OTC Compliant
- Fully adjustable, even spray pattern from 1"-8"
- High tack
- Excellent room temperature contact bonds
- Excellent green strength and high heat resistance
- Fast drying with a long open time
- LEED compliant (IEQ Credits 4.1 & 4.4)
- OTC Compliant
- Fully adjustable, even spray pattern from 1"-8"
- High tack
- Excellent room temperature contact bonds
- Excellent green strength and high heat resistance
- Fast drying with a long open time
TECHNICAL SPECIFICATIONS
Packing
Canister
Finish/Color
Clear
Base
Synthetic Rubber
Open Time
60 minutes
Dry Time
4 to 7 minutes
VOC Concentration (EPA Method 24)
6 grams per liter
Recommended Coverage
92.9-111.5 m²/15.8 (1000-1200 sq ft/35 lb)
Brand
Liongrip
Standards and Certifications
SCAQMD, OTC, California Air District Regulations, LEED 4.4, LEED 4.1
Features
Fast-Drying, High Heat Resistance, Low VOC (less than 250 g/l), Non-Flammable, Heavy-Duty, Superior Bond, Long Open Time
Recommended Use
Bathroom / Kitchen, Plastic, Wood Windows, Counter, Cabinet, Particleboard, Metal, Glass, Fiberglass, Masonry, Laminates, Veneer
APPLICATION
The LIONGRIP R095NF is ideal for:
- The lamination of High Performance Laminate (HPL) to particleboard and/or MDF core materials
- The fabrication of store fixtures
- Millwork
- Cabinets
- Work surfaces
- Decorative panels
- And much more!
The LIONGRIP R095NF can also be used in the lamination of a wide range of porous and non-porous materials to themselves and each other, including but not limited to:
- HPL
- Melamine
- Wood veneer
- Decorative metal overlays
- Decorative plastic overlays
- Foam
- Fabric
- Some rubbers
- Some plastics
*Do Not use with unbacked, plasticized vinyls.
Note: The use of plywood as a core material with HPL may void the HPL manufacturers warranty.
- The lamination of High Performance Laminate (HPL) to particleboard and/or MDF core materials
- The fabrication of store fixtures
- Millwork
- Cabinets
- Work surfaces
- Decorative panels
- And much more!
The LIONGRIP R095NF can also be used in the lamination of a wide range of porous and non-porous materials to themselves and each other, including but not limited to:
- HPL
- Melamine
- Wood veneer
- Decorative metal overlays
- Decorative plastic overlays
- Foam
- Fabric
- Some rubbers
- Some plastics
*Do Not use with unbacked, plasticized vinyls.
Note: The use of plywood as a core material with HPL may void the HPL manufacturers warranty.
IMPORTANT INFORMATION
Usage
- Use at room temperature (18°C/65°F) or warmer; for best results, use above 21°C/72°F
- Do not apply or make bonds at temperatures below 18°C/65°F
Storage
- 12 month shelf life from date of manufacture
- Freeze/Thaw Stable; if chilled below 5°C/41°F, agitate well after first warming to 22°C/72°F
- Store between 10°C/50°F and 32°C/90°F
- Keep container tightly closed and store off of the floor when not in use
- Avoid exposure of canisters to direct sunlight
Clean-up
-Remove adhesive overspray from parts using cleaner RS02020L or Citrus Cleaner RCCAR.
Please see the Technical Data Sheet for more info.
- Use at room temperature (18°C/65°F) or warmer; for best results, use above 21°C/72°F
- Do not apply or make bonds at temperatures below 18°C/65°F
Storage
- 12 month shelf life from date of manufacture
- Freeze/Thaw Stable; if chilled below 5°C/41°F, agitate well after first warming to 22°C/72°F
- Store between 10°C/50°F and 32°C/90°F
- Keep container tightly closed and store off of the floor when not in use
- Avoid exposure of canisters to direct sunlight
Clean-up
-Remove adhesive overspray from parts using cleaner RS02020L or Citrus Cleaner RCCAR.
Please see the Technical Data Sheet for more info.
