Pacta Drop-Down Door System

To buy, choose from the options below.
Motion Technology: Soft-Opening Push-to-Open / Soft-Opening Load Capacity: 4.41 to 8.82 lb* 6.61 to 13.2 lb* 8.82 to 19.8 lb* Select Options
Product № Motion Technology Load Capacity
FRBKFEXWSN9 Soft-Opening 4.41 to 8.82 lb*
FRBKFEXISN9 Soft-Opening 6.61 to 13.2 lb*
FRBKFEXSSN9 Soft-Opening 8.82 to 19.8 lb*
FRBKFEPWSN9 Push-to-Open / Soft-Opening 4.41 to 8.82 lb*
FRBKFEPISN9 Push-to-Open / Soft-Opening 6.61 to 13.2 lb*
FRBKFEPSSN9 Push-to-Open / Soft-Opening 8.82 to 19.8 lb*


A compact hinge for drop-down doors that operates without the need for additional stays or cables.
- This opening system offers a decelerated opening action and the fall of the door is gradual and controlled.
- In the fully-open position, the door and bottom panel are aligned, creating a uniform and flat surface.
- Also available with push self-opening system and comes in a variety of finishes.

Comprised of two separate types of hinges:
- The main hinge controls the opening and closing action.
- The second is an optional flap hinge, to insure the perfect alignment of the door with the bottom panel.


Requires ONE of the following products

Set of 2 units
Set of 2 units
Set of 2 units
Set of 2 units


System Type
Type of Opening
Drop-Down Opening
Door Type
Wood Door
Door Height
11 to 15 3/4 in*
Opening Types NEW
Drop-Down Opening
Hinge Opening Angle

Measures shown with an asterisk (*) have been converted as per your preference. These are not the official measures. To view the measures specified by the manufacturer, click here.


Kitchen cabinets, bathroom cabinets and living rooms, as well as in commercial applications.

- The ideal solution for residential and commercial furniture where an added work surface is desired.
- Due to an ample load rating, Pacta can create a functional writing surface, a serving area or an extension for a variety of purposes.
- For wood doors only.


- The #7 x 5/8" (15.85 mm) coarse thread flat head wood screws may be substituted the Euro screws included in the kit.
- Pacta is capable of supporting considerable weight. If the open door is to be used as a work surface or to hold an appliance, please consult the technical drawing for the actual load rating based on the door size.
- The flap hinge is required for doors wider than 30" (762 mm). Screw the hinge into the 1-3/8" (35 mm) holes on the unit and cover with screw cap.

- The covers are not included and must be ordered separately.

- The center hinge is required for doors 30" or wider. The center hinge is fully cam adjustable.



Box kit includes:
- 2 Pacta hinges
- 2 mounting plates
- 2 Smove and screws


Pacta Drop-Down Door System

To buy, choose from the options.