LED 4 m/13' Tape Light Roll 24 V dc 58 W

To buy, choose from the options below.
Light Color: Cool White Neutral White Warm White Kelvin Color Temperature (K): 3000 K 4000 K 6000 K Luminous Flux: 1320 Lumen 1440 Lumen 1560 Lumen Select Options
Product number Light Color Kelvin Color Temperature (K) Luminous Flux
50460121 Cool White 6000 K 1560 Lumen
50460124 Neutral White 4000 K 1440 Lumen
50460122 Warm White 3000 K 1320 Lumen

Description

Tape on a roll

Can be cut every 10 cm (3.94") or after every 6th LED.
Quick-connect options available.

REQUIRED PRODUCTS

Requires the following products

 
See Color Group, Finish, Length options

Requires ONE of the following products

24V DC Power Supplies Product no. 2651236
  • Color Group: White Group
  • Finish: White
  • Watts: 36 W
  • Length: 4 in
Per unit
OR
24V DC Power Supplies Product no. 2651260
  • Color Group: White Group
  • Finish: White
  • Watts: 60 W
  • Length: 5 in
Per unit
OR
24V DC Power Supplies Product no. 2652412
  • Color Group: Black Group
  • Finish: Black
  • Watts: 12 W
Per unit

TECHNICAL SPECIFICATIONS

Location
Inside Cabinet, Closet, Other
Application
Kitchen, Living Room, Commercial, Furniture, Closet
Mounting
Surface
Luminaire
Flexible Linear
Color Group
White Group
Lighting
Accent
Finish
White
Standards and Certifications
ETL
Length
13 ft
Width
3/8 in
Lighting Type
LED
Tension (V)
24 V
Watts
58 W
Group
LED Group G
Price Point
Elite
Maximum Length
13 ft (3.96 m) Max
Features
Dimmable

SUGGESTED PRODUCTS

  • LED Profiles
  • Power cables and connectors
  • Switches and Dimmers
  • Transformers and Power Supplies
  • Wire Management Moldings

ADVANTAGES AND BENEFITS

Easy-clip system to connect two strips together: no need to use any additional screws!

Available in 3 different color temperatures:
- 3000° Warm White
- 4000° Neutral White
- 6000° Cool White

Direct Quick Connect available.
- Quick Connect connecting cables available in 4 lengths: choose from 2", 20", 40", and 79".

APPLICATION

Accent and perimeter lighting.

INCLUDED PRODUCT(S)

Includes one power cord starter lead with each roll.

IMPORTANT INFORMATION

14.4 W per meter (3')
Requires power cord if you are cutting the tape light roll to start a NEW run.
3 different lengths available with quick-connect feature: 20", 40" and 79", in black or white.
Power supply required, with 3 options to choose from:
- 2652412 = 2' max run
- 2651236 = 6' max run
- 2651260 = 13' max run

DISCLAIMER

One power cord to connect to power supply is included in each roll. If you need more power cords they are available separately. Each LED tape light roll has 3M Adhesive tape on backside. You can affix the tape into position after you have measure and mark your installation location. You only have ONE CHANCE for correct installation if you try to unpeel the tape to reposition it, it will never fully adhere again. You will require additional 3M Adhesive, sold separately. Be careful when you install the LED strip light on conducting surfaces, because the solder contact can cause a short circuit. Avoid buckling the LED strip light because the PCB board can be damaged easily. You can turn on the power supply in the final step when everything is set up.
LED 4 m/13' Tape Light Roll 24 V dc 58 W

To buy, choose from the options.