Instructions
TERNO ACCORDION FOLDING Hardware Set
To buy, choose from the options below.
Description
Without bottom guide
TERNO ACCORDION Folding Hardware Set for multiple wood doors weighing up to 40 kg (88 lb) each.
Features:
- Top-hung center-folding door system; does not require a bottom guide channel
- Choice of 2-door, 3-door, and 4-door hardware sets
- Hardware can be surface-mounted to the door
- Top and bottom scissor type hinges
- Simple to install and easy to adjust
- First panel is anchored securely by an upper pivot mounted in the track and a lower pivot mounted to a bracket attached to the door jamb
- First panel is approximately half the width of the other folding doors
IMPORTANT: Measure in metric units for greater accuracy during installation.
Maximum panel width for 2 end-folding panels = 610 mm (24 in) each.
ADVANTAGES AND BENEFITS
- Top hung center folding door system does not require a bottom guide channel
- Hardware can be surface mounted to the door
- Top and bottom scissor type hinges
- Simple to install that is easy to adjust
- First panel is anchored securely by an upper pivot mounted in the track and a lower pivot mounted to bracket to the door jamb
- Hardware can be surface mounted to the door
- Top and bottom scissor type hinges
- Simple to install that is easy to adjust
- First panel is anchored securely by an upper pivot mounted in the track and a lower pivot mounted to bracket to the door jamb
TECHNICAL SPECIFICATIONS
Door Position
Inset/Inlay
Roller Position
Upper
Door Installation
Top Hung
Stopper
None
Door Material
Wood
Roller Type
Axle (Bushing)
Adjustable
Yes
Weight Capacity per Door
44.1 to 88.2 lb*
Door Height
39 3/8 to 108 in*
Door Width
11 3/4 to 39 3/8 in*
Track type
Box Track
Door Movement
Folding
Detailed Door Movement
Center folding, Multi-Folding
Disclaimer
Measures shown with an asterisk (*) have been converted as per your preference. These are not the official measures. To view the measures specified by the manufacturer, click here.
SUGGESTED PRODUCTS
- Sliding Solutions for Architectural Applications
- Running and Guiding Tracks for Sliding Door Systems
IMPORTANT INFORMATION
IMPORTANT: Use metric dimensions for greater accuracy during installation.
Please make sure to read the entirety of the installation manual before proceeding with the installation.
A groove is required for the bottom of the door for the floor guide, see instructions.
Always remove debris/dust/residues (sawdust and/or aluminum) from all tracks and guide channels using a dry cloth during installation and before operating the system.
Never spray lubricant on this product.
Do not exceed stated limitations and parameters. This will cause early wear and performance failure.
Please make sure to read the entirety of the installation manual before proceeding with the installation.
A groove is required for the bottom of the door for the floor guide, see instructions.
Always remove debris/dust/residues (sawdust and/or aluminum) from all tracks and guide channels using a dry cloth during installation and before operating the system.
Never spray lubricant on this product.
Do not exceed stated limitations and parameters. This will cause early wear and performance failure.
DISCLAIMER
* Pictures provided for visual reference only: actual product may vary.
- All required hardware should be ordered and obtained prior to initiating fabrication or installation work. Please verify that the parts and quantities listed in your order are correct before proceeding to checkout.
- Always use instructions provided by the manufacturer, as included with the product. Manufacturer reserves the right to amend, modify, or otherwise supplement any previously issued product and/or technical information, as deemed required from time to time, without prior notice.
- The documentation, drawings, and instructions on this page apply to the system described on this page only. Richelieu expressly declines all responsibility for any design or construction that combines this system with systems from this same manufacturer or systems from other manufacturers.
- Installation of the product shall be executed by qualified individuals only, always ensuring that each product is securely installed using proper fixation methods, as appropriate for each applicable substratum. We trust that anyone installing these products has the required skills, knowledge, and experience. Richelieu expressly disclaims any liabilities for results obtained through improper use or installation.
