Installation
Single Upper Aluminum track for Evanescence
To add to cart, choose from the options below.
Aluminum
The single upper aluminum track is made for the Evanescence pocket door system for a door weighing up to 220 lbs (100 kg). A slot for an activator is located in the interior ceiling of the track when using a soft close mechanism. Select from four standard lengths from 48 in to 96 in (1219 mm to 2438 mm), which can be cut to fit.
| Product # | Overall Length |
|---|---|
| 89YM1219A10 | 48 in |
| 89YM1524A10 | 60 in |
| 89YM1828A10 | 72 in |
| 89YM2438A10 | 96 in |
ADVANTAGES AND BENEFITS
Slot for activator when using a soft close mechanism
TECHNICAL SPECIFICATIONS
Detailed Door Movement
Single sliding
Track type
Box Track
Compatible with
Evanescence
Door Installation
Top Hung
Load Capacity
220 lb
Manufacturing Material
Aluminum
Track Mounting
Ceiling Mount
Roller Position
Upper
Finish
Anodized
Door Thickness
1 3/8 to 1 3/4 in
Product type
Running and Guiding Tracks
Brand
Onward
IMPORTANT INFORMATION
IMPORTANT:
- Use metric dimensions for greater accuracy during installation.
- Please make sure to read the entirety of the installation manual before proceeding with the installation.
- Wear safety gear such as gloves, safety glasses, safety shoes, and ear protection.
- Every fastener used to attach the track to the wall must be fastened securely into a structural surface.
- Always remove debris/dust/residues (sawdust and/or aluminum) from all tracks and guide channels using a dry cloth during installation and before operating the system.
- Never spray lubricant on this product.
- Do not exceed stated limitations and parameters. This will cause early wear and performance failure, and will void the warranty.
- Use metric dimensions for greater accuracy during installation.
- Please make sure to read the entirety of the installation manual before proceeding with the installation.
- Wear safety gear such as gloves, safety glasses, safety shoes, and ear protection.
- Every fastener used to attach the track to the wall must be fastened securely into a structural surface.
- Always remove debris/dust/residues (sawdust and/or aluminum) from all tracks and guide channels using a dry cloth during installation and before operating the system.
- Never spray lubricant on this product.
- Do not exceed stated limitations and parameters. This will cause early wear and performance failure, and will void the warranty.
DISCLAIMER
- Pictures provided for visual reference only: actual product may vary.
- All required hardware should be ordered and obtained prior to initiating fabrication or installation work. Please verify that the parts and quantities listed in your order are correct before proceeding to checkout.
- Always use instructions provided by the manufacturer, as included with the product. Manufacturer reserves the right to amend, modify, or otherwise supplement any previously issued product and/or technical information, as deemed required from time to time, without prior notice.
- The documentation, drawings, and instructions on this page apply to the system described on this page only. Richelieu expressly declines all responsibility for any design or construction that combines this system with systems from this same manufacturer or systems from other manufacturers.
- Installation of the product shall be executed by qualified individuals only, always ensuring that each product is securely installed using proper fixation methods, as appropriate for each applicable substratum. We trust that anyone installing these products has the required skills, knowledge, and experience. Richelieu expressly disclaims any liabilities for results obtained through improper use or installation.
- All required hardware should be ordered and obtained prior to initiating fabrication or installation work. Please verify that the parts and quantities listed in your order are correct before proceeding to checkout.
- Always use instructions provided by the manufacturer, as included with the product. Manufacturer reserves the right to amend, modify, or otherwise supplement any previously issued product and/or technical information, as deemed required from time to time, without prior notice.
- The documentation, drawings, and instructions on this page apply to the system described on this page only. Richelieu expressly declines all responsibility for any design or construction that combines this system with systems from this same manufacturer or systems from other manufacturers.
- Installation of the product shall be executed by qualified individuals only, always ensuring that each product is securely installed using proper fixation methods, as appropriate for each applicable substratum. We trust that anyone installing these products has the required skills, knowledge, and experience. Richelieu expressly disclaims any liabilities for results obtained through improper use or installation.
