TYPE 970/A Aluminum Single Track
Product # 189A970310
Length
Press-fit mounting
The TYPE 970/A aluminum single track is designed for the SCORRI 10KG cabinet door sliding system. It is recess mounted to the top of the cabinet for single or bypassing applications by mounting the tracks parallel and spaced apart, as per the instructions. For installation and assembly, press-fit the track into the groove in the cabinet. An industrial adhesive for aluminum and wood may be used to hold the track securely (not included).
Features:
- Available in silver anodized
- Two different sizes: 78 in (2 m) and 118 in (3 m) lengths
- Can be cut to suit application
IMPORTANT: Use metric dimensions for greater accuracy during installation. Cut a groove in the ceiling of the cabinet 14 mm wide by 12 mm deep, as per the instructions.
Features:
- Available in silver anodized
- Two different sizes: 78 in (2 m) and 118 in (3 m) lengths
- Can be cut to suit application
IMPORTANT: Use metric dimensions for greater accuracy during installation. Cut a groove in the ceiling of the cabinet 14 mm wide by 12 mm deep, as per the instructions.
| Product # | Overall Length |
|---|---|
| 189A970310 | 9 ft 10 in* |
| 189A970210 | 78 3/4 in* |
ADVANTAGES AND BENEFITS
- Press-fit track
- Available in silver anodized
- Two different sizes: 78 in (2 m) and 118 in (3 m) lengths
- Available in silver anodized
- Two different sizes: 78 in (2 m) and 118 in (3 m) lengths
TECHNICAL SPECIFICATIONS
Product #
189A970310
Detailed Door Movement
Single sliding
Track type
Single Running
Compatible with
Scorri 10KG
Load Capacity
22 lb*
Manufacturing Material
Aluminum
Drilling Depth
15/32 in*
Track Mounting
Recessed - Inside Ceiling
Width
9/16 in*
Finish
Silver
Door Material
Wood
Pre-drilled
No
Door Movement
Straight Sliding
Product type
Running and Guiding Tracks
Overall Height
9/16 in*
Application
Furniture, Cabinet, Storage
Disclaimer
Measures shown with an asterisk (*) have been converted as per your preference. These are not the official measures. To view the measures specified by the manufacturer, click here.
IMPORTANT INFORMATION
- IMPORTANT: Cut a groove in the ceiling of the cabinet 14 mm wide by 12 mm deep, as per the instructions.
- Please make sure to read the entirety of the installation manual before proceeding with the installation.
- Use metric dimensions for greater accuracy during installation.
- Wear safety gear such as gloves, safety glasses, safety shoes, and ear protection.
- Every fastener used to attach the track to the wall must be fastened securely into a structural surface.
- Always remove debris/dust/residues (sawdust and/or aluminum) from all tracks and guide channels using a dry cloth during installation and before operating the system.
- Never spray lubricant on this product.
- Do not exceed stated limitations and parameters. This will cause early wear and performance failure, and will void the warranty.
- Please make sure to read the entirety of the installation manual before proceeding with the installation.
- Use metric dimensions for greater accuracy during installation.
- Wear safety gear such as gloves, safety glasses, safety shoes, and ear protection.
- Every fastener used to attach the track to the wall must be fastened securely into a structural surface.
- Always remove debris/dust/residues (sawdust and/or aluminum) from all tracks and guide channels using a dry cloth during installation and before operating the system.
- Never spray lubricant on this product.
- Do not exceed stated limitations and parameters. This will cause early wear and performance failure, and will void the warranty.
DISCLAIMER
Pictures provided for visual reference only: actual product may vary.
- All required hardware should be ordered and obtained prior to initiating fabrication or installation work. Please verify that the parts and quantities listed in your order are correct before proceeding to checkout.
- Always use instructions provided by the manufacturer, as included with the product. Manufacturer reserves the right to amend, modify, or otherwise supplement any previously issued product and/or technical information, as deemed required from time to time, without prior notice.
- The documentation, drawings, and instructions on this page apply to the system described on this page only. Richelieu expressly declines all responsibility for any design or construction that combines this system with systems from this same manufacturer or systems from other manufacturers.
- Installation of the product shall be executed by qualified individuals only, always ensuring that each product is securely installed using proper fixation methods, as appropriate for each applicable substratum. We trust that anyone installing these products has the required skills, knowledge, and experience. Richelieu expressly disclaims any liabilities for results obtained through improper use or installation.
- All required hardware should be ordered and obtained prior to initiating fabrication or installation work. Please verify that the parts and quantities listed in your order are correct before proceeding to checkout.
- Always use instructions provided by the manufacturer, as included with the product. Manufacturer reserves the right to amend, modify, or otherwise supplement any previously issued product and/or technical information, as deemed required from time to time, without prior notice.
- The documentation, drawings, and instructions on this page apply to the system described on this page only. Richelieu expressly declines all responsibility for any design or construction that combines this system with systems from this same manufacturer or systems from other manufacturers.
- Installation of the product shall be executed by qualified individuals only, always ensuring that each product is securely installed using proper fixation methods, as appropriate for each applicable substratum. We trust that anyone installing these products has the required skills, knowledge, and experience. Richelieu expressly disclaims any liabilities for results obtained through improper use or installation.
