Line art
Type RM 009 + RM 010 Surface Fascia and Track
Product # 189RM910A310
Surface mount
The Type RM 009 + RM 010 surface mount track with clip-on fascia for RO 30 sliding door systems for cabinets for single and bi-parting applications.
Features:
- Anodized aluminum track, available in two sizes: 78 5/8 in (2 m) and 118 in (3 m)
- Surface mount the track onto the front edge of the cabinet shelf
- Fascia press fits onto the track without screws
IMPORTANT: Use metric dimensions for greater accuracy during installation.
Features:
- Anodized aluminum track, available in two sizes: 78 5/8 in (2 m) and 118 in (3 m)
- Surface mount the track onto the front edge of the cabinet shelf
- Fascia press fits onto the track without screws
IMPORTANT: Use metric dimensions for greater accuracy during installation.
| Product # | Overall Length |
|---|---|
| 189RM910A310 | 9 ft 10 in* |
| 189RM910A210 | 78 3/4 in* |
ADVANTAGES AND BENEFITS
- Anodized aluminum track, available in two sizes: 78 5/8 in (2 m) and 118 in (3 m)
- Surface mount the track onto the front edge of the cabinet shelf
- Fascia press fits onto the track without screws
- Surface mount the track onto the front edge of the cabinet shelf
- Fascia press fits onto the track without screws
TECHNICAL SPECIFICATIONS
Product #
189RM910A310
Track type
Single Running, Single guiding
Compatible with
RO 30
Door Installation
Bottom Running
Load Capacity
33.1 lb*
Manufacturing Material
Aluminum
Track Mounting
Wall Mount
Width
13/32 in*
Finish
Anodized Aluminum
Door Material
Wood
Product type
Running and Guiding Tracks
Overall Height
25/32 in*
Application
Furniture, Cabinet, Storage
Disclaimer
Measures shown with an asterisk (*) have been converted as per your preference. These are not the official measures. To view the measures specified by the manufacturer, click here.
IMPORTANT INFORMATION
- Use metric dimensions for greater accuracy during installation.
- Please make sure to read the entirety of the installation manual before proceeding with the installation.
- Wear safety gear such as gloves, safety glasses, safety shoes, and ear protection.
- Every fastener used to attach the track to the wall must be fastened securely into a structural surface.
- Always remove debris/dust/residues (sawdust and/or aluminum) from all tracks and guide channels using a dry cloth during installation and before operating the system.
- Never spray lubricant on this product.
- Do not exceed stated limitations and parameters. This will cause early wear and performance failure.
- Please make sure to read the entirety of the installation manual before proceeding with the installation.
- Wear safety gear such as gloves, safety glasses, safety shoes, and ear protection.
- Every fastener used to attach the track to the wall must be fastened securely into a structural surface.
- Always remove debris/dust/residues (sawdust and/or aluminum) from all tracks and guide channels using a dry cloth during installation and before operating the system.
- Never spray lubricant on this product.
- Do not exceed stated limitations and parameters. This will cause early wear and performance failure.
DISCLAIMER
Pictures provided for visual reference only: actual product may vary.
- All required hardware should be ordered and obtained prior to initiating fabrication or installation work. Please verify that the parts and quantities listed in your order are correct before proceeding to checkout.
- Always use instructions provided by the manufacturer, as included with the product. Manufacturer reserves the right to amend, modify, or otherwise supplement any previously issued product and/or technical information, as deemed required from time to time, without prior notice.
- The documentation, drawings, and instructions on this page apply to the system described on this page only. Richelieu expressly declines all responsibility for any design or construction that combines this system with systems from this same manufacturer or systems from other manufacturers.
- Installation of the product shall be executed by qualified individuals only, always ensuring that each product is securely installed using proper fixation methods, as appropriate for each applicable substratum. We trust that anyone installing these products has the required skills, knowledge, and experience. Richelieu expressly disclaims any liabilities for results obtained through improper use or installation.
- All required hardware should be ordered and obtained prior to initiating fabrication or installation work. Please verify that the parts and quantities listed in your order are correct before proceeding to checkout.
- Always use instructions provided by the manufacturer, as included with the product. Manufacturer reserves the right to amend, modify, or otherwise supplement any previously issued product and/or technical information, as deemed required from time to time, without prior notice.
- The documentation, drawings, and instructions on this page apply to the system described on this page only. Richelieu expressly declines all responsibility for any design or construction that combines this system with systems from this same manufacturer or systems from other manufacturers.
- Installation of the product shall be executed by qualified individuals only, always ensuring that each product is securely installed using proper fixation methods, as appropriate for each applicable substratum. We trust that anyone installing these products has the required skills, knowledge, and experience. Richelieu expressly disclaims any liabilities for results obtained through improper use or installation.
