Technical document
Sorry, this product is not available in your region. To find similar products available in your region, click here.
TANDEM plus 563H Full Extension Concealed Undermount Slide for Wood Drawer
Product # WEBKIT1011512
Max. drawer thickness 5/8"
New This product provides four-dimensional adjustment:
- Side-to-side, 1.5 mm (front and rear)
- Height, 3 mm
- Tilt, 5 mm
- Depth, with optional locking device, 3/32 in (2.5 mm)
- Depth, with elongated holes, plus or minus 11/16 in (4.5 mm)
Maximum drawer thickness of 5/8 in (16 mm)
- Side-to-side, 1.5 mm (front and rear)
- Height, 3 mm
- Tilt, 5 mm
- Depth, with optional locking device, 3/32 in (2.5 mm)
- Depth, with elongated holes, plus or minus 11/16 in (4.5 mm)
Maximum drawer thickness of 5/8 in (16 mm)
Product # | Length | Adjustment |
---|---|---|
WEBKIT1011512 | 15 in* | Height Adjustment Only - Vertical Mount |
WEBKIT1011506 | 9 1/32 in* | Height, Side and Depth Adjustment |
WEBKIT1011504 | 9 1/32 in* | Height Adjustment Only - Standard |
WEBKIT1011503 | 9 1/32 in* | Height Adjustment Only - Vertical Mount |
WEBKIT1011505 | 9 1/32 in* | Height and Side Adjustments - Standard |
WEBKIT1011510 | 12 in* | Height, Side and Depth Adjustment |
WEBKIT1011507 | 12 in* | Height Adjustment Only - Standard |
WEBKIT1011508 | 12 in* | Height Adjustment Only - Vertical Mount |
WEBKIT1011509 | 12 in* | Height and Side Adjustments - Standard |
WEBKIT1011514 | 15 in* | Height, Side and Depth Adjustment |
WEBKIT1011511 | 15 in* | Height Adjustment Only - Standard |
WEBKIT1011513 | 15 in* | Height and Side Adjustments - Standard |
WEBKIT1011518 | 18 in* | Height, Side and Depth Adjustment |
WEBKIT1011515 | 18 in* | Height Adjustment Only - Standard |
WEBKIT1011516 | 18 in* | Height Adjustment Only - Vertical Mount |
WEBKIT1011517 | 18 in* | Height and Side Adjustments - Standard |
WEBKIT1011522 | 21 in* | Height, Side and Depth Adjustment |
WEBKIT1011519 | 21 in* | Height Adjustment Only - Standard |
WEBKIT1011520 | 21 in* | Height Adjustment Only - Vertical Mount |
WEBKIT1011521 | 21 in* | Height and Side Adjustments - Standard |
ADVANTAGES AND BENEFITS
- Integrated BLUMOTION soft-close.
- Wide range of drawer lengths from 9" to 30", in 3" increments.
- Bottom mount holes for mounting to a fixed shelf or a flush bottom cabinet.
- Available for standard and heavy-duty applications.
- Excellent stability and less sag even when drawer is fully loaded.
- Bearing block for consistent reveal even in fully loaded drawer.
- Rear notch increases to 35 mm to accomodate new side-to-side adjustment.
- Same drawer box construction as the curent TANDEM runners.
- Same drilling pattern as current 562/568 TANDEM plus BLUMOTION concealed runners.
- Wide range of drawer lengths from 9" to 30", in 3" increments.
- Bottom mount holes for mounting to a fixed shelf or a flush bottom cabinet.
- Available for standard and heavy-duty applications.
- Excellent stability and less sag even when drawer is fully loaded.
- Bearing block for consistent reveal even in fully loaded drawer.
- Rear notch increases to 35 mm to accomodate new side-to-side adjustment.
- Same drawer box construction as the curent TANDEM runners.
- Same drilling pattern as current 562/568 TANDEM plus BLUMOTION concealed runners.
TECHNICAL SPECIFICATIONS
Product #
WEBKIT1011512
Brand
Blum
Drawer Type
Wood and Melamine
Slide Extension
Full Extension
Motion Technology
Soft-Close
Finish
Zinc
Product Line
TANDEM Plus
Load Capacity
100 lb
Slide Mounted
Bottom-Mounted
Pull-Out Type
563H (US) Face Frame - 5/8" Thick Sides
Side
Both
BLUM Technology
Blumotion
Disclaimer
Measures shown with an asterisk (*) have been converted as per your preference. These are not the official measures. To view the measures specified by the manufacturer, click here.